do I have to?
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
do I have to?
08 May 2010 18:46
I have head off 73z1 for exhaust stud repair (PO rigged shitty). My ? is do I have to replace the cylinder block gasket as well? the reason i ask is that today I saw a film of oil where the cylinder block attaches. Nothing of note but that would indicate a broken seal possibly?? or would a re-torque be sufficient when the head is reattached?
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: do I have to?
08 May 2010 19:15
stonemaster wrote:
did the jugs come up?....when i pulled my head i saw a little weepage....i reassembled and had a tiny bit on the first start-up, but its all good....just dont any cycling of the motor with head off.....if i had to bet, i would say you are all right.......g/l.....keith
I have head off 73z1 for exhaust stud repair (PO rigged shitty). My ? is do I have to replace the cylinder block gasket as well? the reason i ask is that today I saw a film of oil where the cylinder block attaches. Nothing of note but that would indicate a broken seal possibly?? or would a re-torque be sufficient when the head is reattached?
did the jugs come up?....when i pulled my head i saw a little weepage....i reassembled and had a tiny bit on the first start-up, but its all good....just dont any cycling of the motor with head off.....if i had to bet, i would say you are all right.......g/l.....keith
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: do I have to?
08 May 2010 19:35
no they didnt come up, had a little weapage on the lower corner, had it on kickstand, got it propped more upright now.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: do I have to?
08 May 2010 20:52
I suggest it would be the best to at least replace the base gasket and O-ring around the cam chain area, but also would be easy for a cam chain with a master link, and new piston rings. Probably around $200 bucks for the parts.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: do I have to?
08 May 2010 20:59
Im talking bout the gasket at the base of the cylinder block, I'll be putting a big bore kit (1045) in a year or so.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: do I have to?
08 May 2010 21:04
Base Gasket is at the bottom of cylinder block, and if it has been seeping/ leaking it will most likely be worse upon reassembly without replacement.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: do I have to?
09 May 2010 03:38
well thats one yes and one no note there was no weepage before dis-assembly, anyone else??
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
- rt green
-
- Offline
- User
-

Registered
- Posts: 49
- Thanks: 0
Re: do I have to?
09 May 2010 09:39
replace. why take the chance. then you would have to do it all over again. it would give you a chance to check up on the internal parts. save gambling for the stock market.
Please Log in or Create an account to join the conversation.
- csrjoe
-
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 0
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: do I have to?
09 May 2010 15:33
yes its da Betty
and I think keith s answer is da one,
thanx for your replies
big bore kit goin in next year , internals are fine for now. will update, Betty is some old school FAP material say what.
and I think keith s answer is da one,
thanx for your replies
big bore kit goin in next year , internals are fine for now. will update, Betty is some old school FAP material say what.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
