Intake clearance
- sbulla
-
Topic Author
- Offline
- User
-

Registered
- 1980 KZ1000 LTD
- Posts: 157
- Thanks: 0
Intake clearance
11 May 2010 08:02
I know I'm probably getting a bit anal here but, which is better for an intake valve clearance .102mm or .152mm?
Numbers 2,3,4 all check at .127mm but number 1, with a 270 shim is .102mm and, with a 265 shim is .152mm.
I'd sure like to get them all the same. Wish they made a 267.5 shim.
Sonny
Numbers 2,3,4 all check at .127mm but number 1, with a 270 shim is .102mm and, with a 265 shim is .152mm.
I'd sure like to get them all the same. Wish they made a 267.5 shim.
Sonny
Now----
1980 KZ1000 LTD (Kerker 4-1, K&N pods, Dyna gray coils)
Gone but not forgotten----
1966 Honda 305 Superhawk
1969 HD 350 Sprint
1971 500 H1
1972 250 F8
1972 750 H2
1973 KX250
1995 HD Sportster 1200
2000 HD Softail
2002 KLR650
1980 KZ1000 LTD (Kerker 4-1, K&N pods, Dyna gray coils)
Gone but not forgotten----
1966 Honda 305 Superhawk
1969 HD 350 Sprint
1971 500 H1
1972 250 F8
1972 750 H2
1973 KX250
1995 HD Sportster 1200
2000 HD Softail
2002 KLR650
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Intake clearance
11 May 2010 08:21 - 11 May 2010 08:25
"I know I'm probably getting a bit anal here"... Hey that's my title... :blush: You have no idea how anal I get... Ask Larry & Plumm... :laugh:
Due to performance build (compressions, cams and head) & heat, here's what I was taught...
Intakes @ .05 to .10mm
Exhaust @ .10 to .15mm
Due to heat, the exhaust clearance will shrink on you. Set between .1 - .15mm and shortly within running, she'll drop around the .10mm clearnace...
The intake will hold fairly steady so better at the lower clearance ~.10mm...
OMR
Due to performance build (compressions, cams and head) & heat, here's what I was taught...
Intakes @ .05 to .10mm
Exhaust @ .10 to .15mm
Due to heat, the exhaust clearance will shrink on you. Set between .1 - .15mm and shortly within running, she'll drop around the .10mm clearnace...
The intake will hold fairly steady so better at the lower clearance ~.10mm...
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 11 May 2010 08:25 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Intake clearance
11 May 2010 08:31
Because the gaps will not get bigger but will get smaller in time, when in doubt I always go with the next size larger shim. The only side effects will be that you will have .05mm less lift and the valves might "hiss' a bit more. But it is true, on the exhaust you do want to go bigger on the intakes it will not be that critical. If you have under-bucket shims than definitely go with the larger gap. It is a lot of work to go threw to change them again.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Intake clearance
11 May 2010 11:16 - 11 May 2010 11:24
sbulla wrote:
I'd never leave one at minimum clearance. A shade wide is no problem, too tight can burn a valve and ruin the valve seat. On mine, spec is .05 - .10 so I would think .102 would be OK but .15 is probably better.I know I'm probably getting a bit anal here but, which is better for an intake valve clearance .102mm or .152mm?
Numbers 2,3,4 all check at .127mm but number 1, with a 270 shim is .102mm and, with a 265 shim is .152mm.
I'd sure like to get them all the same. Wish they made a 267.5 shim.
Sonny
1979 KZ-750 Twin
Last edit: 11 May 2010 11:24 by bountyhunter.
Please Log in or Create an account to join the conversation.
- 9am53
-
- Offline
- User
-

Registered
- homebrew, and some bbq
- Posts: 1787
- Thanks: 3
Re: Intake clearance
11 May 2010 12:24
Old Man Rock wrote:
hmm, so are you a tight end, or a wide reciever? :woohoo:
You have no idea how anal I get... Ask Larry & Plumm...
hmm, so are you a tight end, or a wide reciever? :woohoo:
'84 GPz900r
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
