clutch springs

  • toad
  • toad's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 196
  • Thanks: 7

clutch springs

13 May 2010 11:26
#367665
I believe I'm in need off new clutch springs and someone told me I could put an extra washer on the bolt until I get some.Does this really work and do I just add the washers to the backside of the 5 springs?It's a z1 thanks
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: clutch springs

13 May 2010 11:28
#367666
That might help a little but as I recall the free length of those springs was about 1" so I am not sure a washer would do much to increase spring force.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: clutch springs

13 May 2010 11:32 - 13 May 2010 11:33
#367667
Why bother. You will have to do twice the work and use twice the oil to do all this work. You can have a new set of springs from Z1E in a matter of days. In the meantime just ride the way it is. When you replace the springs take the opportunity to clean and deglaze the clutch plates. New springs are less than $20 including shipping from Z1E.

www.z1enterprises.com/detail.aspx?ID=319
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 13 May 2010 11:33 by otakar.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: clutch springs

13 May 2010 12:45
#367681
New springs the best idea, but I would also check the free play at the side cover adjustment as well as the cale at the lever.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: clutch springs

13 May 2010 13:13
#367689
I wouldn't want to do the job twice especially considering that you'll need to buy the gasket twice (assuming you plan to do the job correctly). As stated by others, just order the springs (and gasket) and ride as is for a week. One other note; once you open up the clutch you should measure the friction plates to ensure that they are within service limits. Otherwise new springs won't fix a clutch slipping problem. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: clutch springs

13 May 2010 13:18
#367690
how many miles are on the bike?
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

  • PLUMMEN
  • PLUMMEN's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7983
  • Thanks: 104

Re: clutch springs

13 May 2010 18:10
#367755
what is the clutch doing? have you tried adjusting it?
Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

  • toad
  • toad's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 196
  • Thanks: 7

Re: clutch springs

15 May 2010 07:11
#368086
well I got a little anxious and tore the clutch plates out of the bike to find 4 cracked fiber plates,I got 4 more good ones from a buddy cleaned and deglazed all of them,reassembled,I even reused the old gasket and wow what a difference no slipping and no leaks iether.I still may order a whole clutch kit soon anyway but,this was a good temporary fix.thanks cheers.
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: clutch springs

15 May 2010 08:24 - 15 May 2010 08:28
#368093
Post some pictures of what you found cracked. I would be interested. Especially on a stock bike. If the clutch was overheating than it was slipping and the springs are still bad. as I have mentioned before in other posts. The springs go bad with time under compression.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 15 May 2010 08:28 by otakar.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum