Air Suction Valves

  • BIGD
  • BIGD's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 56
  • Thanks: 0

Air Suction Valves

18 May 2010 10:36
#368762
I have a U.S. model 1981 KZ1000M1 it is the only part of the world that has this system on the motorcycle, every other country that this bike was shipped to does not. I am hoping someone can tell me what was there for the rest of the bikes. I had a Canadian model many years ago and can not remember. It most likely did not have the air suction valves in the cylinder head cover, and was wondering if the left and right air suction covers had the opening on each that connected the hose to the air suction valve or was there just a flat cover on the cylinder head cover with no connection. And if the air suction valve covers still did have the connection but not the air suction system where did the hoses connect to from the top of the air suction covers. If a picture from my manual is needed please ask. My manual only shows the U.S. model and not the others without this system. Thanks Don
Had 1981 KZ1000 M1 From 1981-1995 Canadian Model
Have 1981 KZ1000 M1 US Model

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Air Suction Valves

18 May 2010 10:57
#368766
Others are just plain without air suction covers.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • hocbj23
  • hocbj23's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Air Suction Valves

18 May 2010 12:26
#368776
x2

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Air Suction Valves

18 May 2010 13:45
#368789
X3

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: Air Suction Valves

18 May 2010 15:29
#368810
In the other countries, the head still had the ports, but the valve cover was plain. However, if I recall, the non-U.S. valve cover had little round tabs that stuck out a little bit at the gasket surface just enough to cover the ports in the head.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum