Transmission noise
- prosserk
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Transmission noise
22 May 2010 09:58
so i bought a KZ 900 a few months ago and have put about 500 miles on it with no problems. then i had my clutch cable break. so i replaced it and also changed my oil at the same time. after doing this i went on a 150 mile ride and it started to make a weird noise. it sounded like a squeeling noise, but it wasn't happening all of the time and it did not make a difference what RPMs i was at. then a few days later i went for a ride and got about ten miles and it and when i was riding something happened and it felt like someone put the breaks on. when i got stopped it looked like smoke was coming out of the oil breather. when i tried to move again it almost felt like there was a brake on, but the engine would still sit there and run fine and i could shift through the gears. then when it cooled down i could ride it again but it would still make the noise randomly. i was just wondering if anyone had any ideas. thanks
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Transmission noise
22 May 2010 10:14
how tight is your drive chain it could be the countershaft bearing failing.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: Transmission noise
22 May 2010 13:02
did u adjust the clutch cable so that it had the proper amount of play in it at the bar lever and at the release bearing.If too tight u could have fried ur clutch.bj
Please Log in or Create an account to join the conversation.
- prosserk
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: Transmission noise
24 May 2010 10:37
ya i know i adjusted the cable right. i have a shop manual and i did it exactly like it said to in the book. my drive chain is pretty loose. probably to the point that i need to tighten it, but i will check to see if the bearing is getting bad.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Transmission noise
24 May 2010 11:23
I think I would pull it apart and hope that you haven't spun a bearing in the case bore. It won't get any better it will just get worse and cause more damage like striped gear teeth.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Sandy
-
- Offline
- User
-

Registered
- Fly High,Tony
- Posts: 2448
- Thanks: 13
Re: Transmission noise
24 May 2010 11:47
What did you use for oil when you changed it?
1977 KZ1000 A-1
Please Log in or Create an account to join the conversation.
- patmann
-
- Offline
- User
-

Registered
- Posts: 396
- Thanks: 6
Re: Transmission noise
24 May 2010 12:54 - 27 May 2010 11:48
Kyle,
Has it gotten any better or worse since the time I rode it?
All, I rode it once after this started. It only made the noise, no problems/ slowing down. Once it sounded as if it was on the left ( stator ) side , the next time on the right side.:huh:
Couldn't really tell which side for sure the noise was coming from since he's running a open Kerker or Mac on it
And it was a quick/short 1/2 mile ride.
I loaned him a factory KZ 900 manual, and rode it after the clutch adjustment. The clutch felt fine to me when I was on it.
But as I said, this is THE PLACE to have it figured out at;)
Pat
Has it gotten any better or worse since the time I rode it?
All, I rode it once after this started. It only made the noise, no problems/ slowing down. Once it sounded as if it was on the left ( stator ) side , the next time on the right side.:huh:
Couldn't really tell which side for sure the noise was coming from since he's running a open Kerker or Mac on it
I loaned him a factory KZ 900 manual, and rode it after the clutch adjustment. The clutch felt fine to me when I was on it.
But as I said, this is THE PLACE to have it figured out at;)
Pat
1974 900 Z1 modified to look like a LTD , some engine mods. But I still have all the original parts.
1977 1000 project bike
1972 H1 project bike
If pro is opposite of con, then what is the opposite of progress?
1977 1000 project bike
1972 H1 project bike
If pro is opposite of con, then what is the opposite of progress?
Last edit: 27 May 2010 11:48 by patmann.
Please Log in or Create an account to join the conversation.
- patmann
-
- Offline
- User
-

Registered
- Posts: 396
- Thanks: 6
Re: Transmission noise
25 May 2010 06:29
Kyle,
What type/brand and weight of oil did you use when it was changed?
What type/brand and weight of oil did you use when it was changed?
1974 900 Z1 modified to look like a LTD , some engine mods. But I still have all the original parts.
1977 1000 project bike
1972 H1 project bike
If pro is opposite of con, then what is the opposite of progress?
1977 1000 project bike
1972 H1 project bike
If pro is opposite of con, then what is the opposite of progress?
Please Log in or Create an account to join the conversation.
- prosserk
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: Transmission noise
27 May 2010 11:24
the oil was SAE 10w40, but it was a honda brand. i then dumped that out hoping that was the problem and put in regular pennsoil 10w40 and it seemed to make it better, but it is still making the noise just not as often.
Please Log in or Create an account to join the conversation.
- Jack
-
- Offline
- User
-

Registered
- Posts: 691
- Thanks: 7
Re: Transmission noise
27 May 2010 12:14
You might want to check your clutch pushrod and ball.The squealing noise could be the pushrod welding itself to the ball -if the clutch adjustment is out of whack there is not enough free play between the pushrod & the ball.Hope this helps.
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
Please Log in or Create an account to join the conversation.
- prosserk
-
Topic Author
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: Transmission noise
27 May 2010 12:38
It's the output shaft bearing. does anyone know if i can change that bearing without splitting my case?
Please Log in or Create an account to join the conversation.
- patmann
-
- Offline
- User
-

Registered
- Posts: 396
- Thanks: 6
Re: Transmission noise
27 May 2010 13:01
Kyle,
How did you figure out it's the output shaft bearing??
You can refer to the manual I loaned you for teardown. And I have MANY others IF need be.
And da' BOZ is a great guy when it comes to being anal about tearing down and putting back together. Got'a love him.
But you already know that, don't you..???
Pat
How did you figure out it's the output shaft bearing??
You can refer to the manual I loaned you for teardown. And I have MANY others IF need be.
And da' BOZ is a great guy when it comes to being anal about tearing down and putting back together. Got'a love him.
But you already know that, don't you..???
Pat
1974 900 Z1 modified to look like a LTD , some engine mods. But I still have all the original parts.
1977 1000 project bike
1972 H1 project bike
If pro is opposite of con, then what is the opposite of progress?
1977 1000 project bike
1972 H1 project bike
If pro is opposite of con, then what is the opposite of progress?
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
