cam degree

  • hocbj23
  • hocbj23's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

cam degree

03 Jun 2010 16:57
#373158
Just received a set of "j" cams for my 82 CSR.My assumption is that I will use the J specs to degree these cams when I install them and not the specs for the K bike they are going in. Correct or not?Sounds like a stupid question when I wrote it out but one never knows.Thanks much.bj

Please Log in or Create an account to join the conversation.

  • richard head
  • richard head's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • Posts: 30
  • Thanks: 0

Re: cam degree

03 Jun 2010 17:02
#373161
No worries mate. The lengthy and highly entertainig tutorials will follow shortly. Sit tight.

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: cam degree

03 Jun 2010 17:11 - 03 Jun 2010 17:11
#373166
richard head wrote:
No worries mate. The lengthy and highly entertainig tutorials will follow shortly. Sit tight.

why you waste your time on literary dribble that will be erased within 20 mins of your posting is something that questions your sanity.....doesnt the double wide need some attention with the spray gun?.....:laugh:
Last edit: 03 Jun 2010 17:11 by keith1.

Please Log in or Create an account to join the conversation.

  • hocbj23
  • hocbj23's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

Re: cam degree

03 Jun 2010 17:11
#373167
Thanks.Dont need a tutorial,just need a simple answer as to which set of specs to use.BJ

Please Log in or Create an account to join the conversation.

  • richard head
  • richard head's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • Posts: 30
  • Thanks: 0

Re: cam degree

03 Jun 2010 17:14
#373169
keith1 wrote:
richard head wrote:
No worries mate. The lengthy and highly entertainig tutorials will follow shortly. Sit tight.

why you waste your time on literary dribble that will be erased within 20 mins of your posting is something that questions your sanity.....doesnt the double wide need some attention with the spay gun?.....:laugh:

Only before your power washing.

hocbj23, I believe you have a J motor. That would answer your question. But will wait to see if anything has been missed. Are they stock cams ?

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: cam degree

03 Jun 2010 17:22
#373175
You would use the spec's for the cams that you will be installing.
Do you have adjustable cam sprockets? And a degree wheel/ dial indicator? Otherwise you will be installing per factory service manual by lining up marks.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • beefsquasher
  • beefsquasher's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 112
  • Thanks: 0

Re: cam degree

03 Jun 2010 17:28
#373180
I believe that stock lobe centers are a non-adjustable 110, both intake and exhaust. If you have adjustable cam gears and you want to run the bike as stock, set them there.

You can fiddle around with the timing if you want (just remember to turn the engine over slowly a couple of times to make sure nothing hits). I set my stockers at 107-108 and picked up a bit of midrange. I currently run Kenny Harmon L1 cams at 104-105.

I have fooled around with the timing a bit, and it seems that unless you are wayyyyyy off (like a whole tooth) the bike will still run generally fine.

-Dave
1977 KZ1000 Mutt - 1075, Kenny Harmon Cams .400", RS34, Kerker, Dyna S

1997 Honda XR250R
1977 Yamaha XS360
1972 BMW R60/5

Please Log in or Create an account to join the conversation.

  • 9am53
  • 9am53's Avatar
  • Offline
  • User
  • User
    Registered
  • homebrew, and some bbq
  • Posts: 1787
  • Thanks: 3

Re: cam degree

03 Jun 2010 17:30
#373181
I recently put J cams into my 82 LTD, I wondered the same thing, so either we are both stupid or it's a normal question for someone new to these bikes (or bikes in general). The abbreviated answer was this - you can degree them with a wheel and all that if you are anal, BUT since your new J cams are stock cams for that same motor (J motor) the cam sprockets are not adjustable and the markings are all the same. Just follow the manuals installation instructions and you will be good. Easy!

Please Log in or Create an account to join the conversation.

  • hocbj23
  • hocbj23's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

Re: cam degree

03 Jun 2010 17:32
#373182
I do have the J motor,but it is a K bike (92 hp).J bikes with J motors have different cams that give it about 10 more hp (102).These are stock Kawi J bike/J motor cams.No adjustment on the sprockets,but degree wheel/dial indicator are available and I have help in the form of a long time engine builder in case it is needed.Kawi shop manual in my possession.So I am going to assume J bike/J cam specs.If not accurate ,someone please yell "Stop,stupid" real loud.Thanks.Lol.BJ

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: cam degree

03 Jun 2010 17:40
#373189
You have to have adjustable sprockets where they bolt to the cam, just install per manual, unless you want to learn how to degree a cam. This is a great thing to know but seldom needed on a stock install.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • hocbj23
  • hocbj23's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

Re: cam degree

03 Jun 2010 17:44
#373193
Thanks Dave,Motorhead and 9am.No novice to bikes and engine work in general,but very new to DOHC technology and Kawi in particular.Lookin forward to the week end when me and "Bad Company" are gonna have a cam party.Thanks again.bj

Please Log in or Create an account to join the conversation.

  • 9am53
  • 9am53's Avatar
  • Offline
  • User
  • User
    Registered
  • homebrew, and some bbq
  • Posts: 1787
  • Thanks: 3

Re: cam degree

03 Jun 2010 18:43
#373228
Just make sure the sprockets are not on upside down for some reason (compare your old cams to the new ones to make sure the lobes on the cams and markings on the sprockets are all kosher) then just install according to manual... thats the beauty of installing "stock" cams, there is no need to mess around...you can even up the ante and throw in some GPz cams for more performance and still use the same old stock sprocket markings and shop manual instrucions!

BTW, like I said I did the same swap this winter...you will find at 3000 rpm the freight train will not hit as hard with the J cams, BUT at about 6000 watch out. BTW, do you have a new tach? the J cams don't have a tach gear

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum