Dyna S Install / Spark advancer
- madmatt1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 220
- Thanks: 60
Dyna S Install / Spark advancer
13 Jun 2010 16:49
Can someone please tell me the correct way to remove the spark advancer bolt on a KZ1000? I'm installing a Dyna S ignition, & saw that this bolt has two different size hexes on it and I just want to make sure I remove it the correct way to avoid damage
1977 KZ1000 LTD
1979 KZ1000 LTD
1978 KZ1000A
1979 KZ1000 LTD
1978 KZ1000A
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Dyna S Install / Spark advancer
13 Jun 2010 17:07
Hold the larger one with a box wrench to prevent it from turning while loosening the smaller one.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- madmatt1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 220
- Thanks: 60
Re: Dyna S Install / Spark advancer
13 Jun 2010 17:15
i tried to do this, but after i put a wrench on the larger one, there's not enough of the top nut exposed to get a good bite on it. have to find some slim wrenches i guess?
1977 KZ1000 LTD
1979 KZ1000 LTD
1978 KZ1000A
1979 KZ1000 LTD
1978 KZ1000A
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: Dyna S Install / Spark advancer
13 Jun 2010 17:52
17mm box end on big one,13mm socket on small one?bj
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Dyna S Install / Spark advancer
13 Jun 2010 19:16
Sometimes an air impact wrench (maybe electric impact wrench) will loosen and remove the bolt from end of crankshaft without needing to hold the 17mm nut.
The bolt turns counter-clockwise to loosen.
Good Fortune!
The bolt turns counter-clockwise to loosen.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- madmatt1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 220
- Thanks: 60
Re: Dyna S Install / Spark advancer
14 Jun 2010 10:34
Thanks I'll keep that in mind for sure - I think I'll run over to Sears or somewhere like that today, & see if they have some slim profile box wrenches. There was just absolutely no way for me to fit two box wrenches, or a box wrench & socket on there, I would just end up stripping the hex on the bolt. I'm kind of puzzled & feeling stupid because it seems like everybody else has installed this ignition, and nobody ever mentions running into this problem!
1977 KZ1000 LTD
1979 KZ1000 LTD
1978 KZ1000A
1979 KZ1000 LTD
1978 KZ1000A
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: Dyna S Install / Spark advancer
14 Jun 2010 10:44
nothing stupid about asking.Lots of stupid in not asking and screwing something up.Plus some of us are stupid amd damn lucky--dont ask me how I know.Lol.bj
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Dyna S Install / Spark advancer
14 Jun 2010 11:30
Could also put bike in gear and apply rear brake to hold crankshaft in position while turning out the bolt.
Good Fortune!
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- madmatt1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 220
- Thanks: 60
Re: Dyna S Install / Spark advancer
14 Jun 2010 15:23
Excellent! That was my initial thought, but when I tried that the first time I must not have been putting enough mustard on the brake because the bike was wanting to roll across the garage floor as I was trying to turn the bolt. It was on there REALLY tight, but I got it. Thanks for the help!
1977 KZ1000 LTD
1979 KZ1000 LTD
1978 KZ1000A
1979 KZ1000 LTD
1978 KZ1000A
Please Log in or Create an account to join the conversation.
- Oldwolf
-
- Offline
- User
-

Registered
- Posts: 65
- Thanks: 0
Re: Dyna S Install / Spark advancer
14 Jun 2010 15:43
I used the 17mm open end wrench in my old factory tool bag. It is as you described slimmer than the standard style wrench. I had the same problem as you described but had forgotten.
1977 KZ1000A1, 1105cc,Mikuni RS34mm FS, K&N Pods,Kerker 4/1,Dyna S Ign,Coils & Plug Wires,Progressive Sup. Front&Rear, Derale Oil Cooler.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
