Finding seals and O rings?
- polkat
-
Topic Author
- Offline
- User
-

Registered
- Posts: 513
- Thanks: 1
Finding seals and O rings?
24 Jun 2010 22:30 - 24 Jun 2010 22:32
It's my '82 KZ750H3. The output shaft (that drives the front sprocket) is leaking from it's seal. It also has a somewhat smaller O ring in front of the seal that I suspect is shot as well. Also, the big O ring that goes around the oil filter cover seems to be leaking a bit as well (although it's fairly new). My question is, where can I find these rings and seals without paying a million for them? I'm poor!
Thanks!
Thanks!
Last edit: 24 Jun 2010 22:32 by polkat.
Please Log in or Create an account to join the conversation.
- Skyman
-
- Offline
- User
-

Registered
- 1978 KZ1000-B2 LTD 1982 KZ1000-M2 CSR
- Posts: 912
- Thanks: 3
Please Log in or Create an account to join the conversation.
- JR
-
- Offline
- Sustaining Member
-

Registered
- Posts: 2982
- Thanks: 501
Re: Finding seals and O rings?
25 Jun 2010 04:41
Usually when I buy an oil filter the big O ring comes with the filter..... so your next oil and filter change should take care of that one.
1980 kz750E1, Delkevic exhaust
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Finding seals and O rings?
25 Jun 2010 06:35 - 25 Jun 2010 06:38
Looks like there are $4-5 a seal for all of they stuff to seal the side cover, and there is 2 seals where the shifter goes through the sprocket cover. Looks like you need your VIN # to get the right seals as there is a change mid production.
92050-024 should be the output seal.
92050-024 should be the output seal.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 25 Jun 2010 06:38 by Motor Head.
Please Log in or Create an account to join the conversation.
- warmmushroom
-
- Offline
- User
-

Registered
- Posts: 15
- Thanks: 0
Re: Finding seals and O rings?
25 Jun 2010 08:30
You can buy o-rings at most transmission supply shops if you know the size...you are looking at pennies per ring that way.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
