Leaking exhaust
- Bonehill
-
Topic Author
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
Leaking exhaust
29 Jun 2010 04:52
Hello 'Riders,
I'm a long time lurker, first time poster. I've searched this forum several times but now I'm finally posting my problem. I Seafoamed my 750 N2 that's been sitting around for a couple of years and as soon as it sucked up into the vacuum tube, it immediately came pouring out of the hole in the bottom of the right pipe. What say you, oh wise oracle of all things KZ? Stuck valve? Worn gasket?
I'm a long time lurker, first time poster. I've searched this forum several times but now I'm finally posting my problem. I Seafoamed my 750 N2 that's been sitting around for a couple of years and as soon as it sucked up into the vacuum tube, it immediately came pouring out of the hole in the bottom of the right pipe. What say you, oh wise oracle of all things KZ? Stuck valve? Worn gasket?
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Leaking exhaust
29 Jun 2010 08:43 - 29 Jun 2010 08:45
Bonehill wrote:
Hello, Ian, and WELCOME to KZr! We're glad you're here!
If SeaFoam was sucked into a carb vacuum nipple, it was probably just pumped through the combustion chamber and into the exhaust system, where it's leaking out a drain hole.
SeaFoam is usually added to the gasoline inside the fuel tank to help clean the carbs as fuel is burned while riding. Maybe it could be sprayed into the air intake side of the carbs while the engine is running, as a more concentrated application.
In any event, the SeaFoam is supposed to pass through the carb fuel passages. But going into the carb vacuum nipple passes directly into the intake port without going through any carb fuel passages. Probably doesn't hurt anything, other than perhaps foul a spark plug, but I don't suspect any beneficial results.
Good Fortune!
Hello 'Riders,
I'm a long time lurker, first time poster. I've searched this forum several times but now I'm finally posting my problem. I Seafoamed my 750 N2 that's been sitting around for a couple of years and as soon as it sucked up into the vacuum tube, it immediately came pouring out of the hole in the bottom of the right pipe. What say you, oh wise oracle of all things KZ? Stuck valve? Worn gasket?
Hello, Ian, and WELCOME to KZr! We're glad you're here!
If SeaFoam was sucked into a carb vacuum nipple, it was probably just pumped through the combustion chamber and into the exhaust system, where it's leaking out a drain hole.
SeaFoam is usually added to the gasoline inside the fuel tank to help clean the carbs as fuel is burned while riding. Maybe it could be sprayed into the air intake side of the carbs while the engine is running, as a more concentrated application.
In any event, the SeaFoam is supposed to pass through the carb fuel passages. But going into the carb vacuum nipple passes directly into the intake port without going through any carb fuel passages. Probably doesn't hurt anything, other than perhaps foul a spark plug, but I don't suspect any beneficial results.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 29 Jun 2010 08:45 by Patton.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Leaking exhaust
29 Jun 2010 11:26 - 29 Jun 2010 11:27
I have done the cleaning procedure where the liquid Seafoam gets sucked directly into the intake manifolds while the engine is running (which stalls the engine) and then you let it sit five minutes and restart it. It never occurred to me that some liquid could be kicked out into the exhaust but it probably could as the engine dies and goes through it's last couple of revolutions. I don't think that would hurt anything, might actually release some carbon and let it get blown out.
1979 KZ-750 Twin
Last edit: 29 Jun 2010 11:27 by bountyhunter.
Please Log in or Create an account to join the conversation.
- Bonehill
-
Topic Author
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
Re: Leaking exhaust
30 Jun 2010 05:59
Thanks for replying and it's great to officially be here. I 'foamed it again without any problems this time. Three cheers for Seafoam!
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Leaking exhaust
30 Jun 2010 06:20
I'm sure the warning is on the bottle, but make sure the feed rate of liquid into a running motor is slow enough not to Hydro-lock it, bent rods, broken pistons, =big problem.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
