Cam cover gasket.

  • bhardy501
  • bhardy501's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 82
  • Thanks: 0

Cam cover gasket.

04 Jul 2010 16:59
#380238
Hey guys, My KZ1000 is leaking a little oil around the cam cover gasket. Is this a fairly easy change or is it a major job to change that gasket out?
1980 KZ1000B LTD

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Cam cover gasket.

04 Jul 2010 17:07
#380239
Easy job, pull the tank,and coils(make a diagram as to where the primary wires go).

Scrape the old gasket off using a sharp piece of Lexan or Plexiglass.Wipe the sealing surfaces with lacquer thinner and let dry.

Try not to drop any old gasket inside the cam areas. The rubbber cam plugs should be replaced too as they shrink from heat and age.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • bhardy501
  • bhardy501's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 82
  • Thanks: 0

Re: Cam cover gasket.

04 Jul 2010 19:56
#380287
Thanks. Does the cam cover ends come with a gasket as a set or do you have to get them seperate?
1980 KZ1000B LTD

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Cam cover gasket.

04 Jul 2010 20:18
#380290
I'd check with www.z1enterprises.com for new cam plugs and valve/cam cover gasket.

When I had my 1977 Kz1000, the cam plugs and cam cover were seperate items.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum