Cam Cap damage
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Cam Cap damage
11 Jul 2010 15:33
the inside of #1 cam cap has damage, one side had sheared some metal off, rode it 40 miles and didnt notice anything peculiar, just found out when adjusting valves, appears the raised U shaped portion of shaft between bushings hit the inside of the cap shaving off some metal, i found the metal. How screwed am I? repair procedures ? do i have do it immediately or can i wait till next year when i put the big bore kit in ?? dont have pics my cameras broke.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Cam Cap damage
11 Jul 2010 15:41
what did your filter look like? id pull the caps off and look at the bearings,also see if you can tell what caused the cam to ride over.
do you have one of those aftermarket tensioners everybody seems to like to tighten with an impact wrench to quiet things down?
do you have one of those aftermarket tensioners everybody seems to like to tighten with an impact wrench to quiet things down?
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Cam Cap damage
11 Jul 2010 15:48
the shaft was not reinstalled correctly, thats what caused it, I had someone helping me and didnt notice at the time the mistake. it shaved a small sliver off, it was laying inside the section between the bucket areas so nothing got into anything, my ? is since nothing else was damaged and it ran fine for 40 miles is it imperative to repair now and HTF do you repair something like that anyway
moral of the story, watch out for "Friends" who say they know a little wrenching
moral of the story, watch out for "Friends" who say they know a little wrenching
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Cam Cap damage
11 Jul 2010 15:51
id say to pull the filter and check rest of cam bearings since valve cover is easy to get at,if everything checks out ride the wheels off of it till the rebuild
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Cam Cap damage
11 Jul 2010 15:56
already done and thanx alot, i take back almost everything I've said to irritate you:blush: :woohoo:
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Cam Cap damage
11 Jul 2010 15:58
stonemaster wrote:
did it tide over far enough for cam chain to rub ?
as long as its only almost everything,we need entertainment ya know! :woohoo:already done and thanx alot, i take back almost everything I've said to irritate you:blush: :woohoo:
did it tide over far enough for cam chain to rub ?
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Cam Cap damage
11 Jul 2010 16:09 - 11 Jul 2010 16:11
no it didnt, the dumbass helping me admitted the shaft was a little off, to the side the shaved, he thought it would straighten itself out, well it did, myh fault really for not double checking behind (I was getting the next set o parts, really in a hurry to ride ya'll know what i mean), my guess is he sliver shaved of in the first minute or two, it was in three pieces looked like a large stripped thread , I think i lucked out this time.
Last edit: 11 Jul 2010 16:11 by stonemaster.
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Cam Cap damage
12 Jul 2010 19:37
well here's what happened, on both camshafts the are guides which fit into channels on the 1 & 3 cam caps, and keep the shafts from moving side to side. When re assembling, the cap was resting one the edge of the guide. Instead of tightening the left cap first which aligns the shaft, my "Friend" tightened the right one first, which held the shaft in the incorrect position. then when the left #1 cap was tightened it gradually shaved the edge of the cap guide channels OFF. luckily no other damage occurred but with this damage the cam shaft could move out of position, so the cap is now at the machine shop. Its cool when you get an extra pair of hands to help but be sure what those hands are doing... Thanx for the responses, ESPECIALLY Plummerdude LOL
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: Cam Cap damage
12 Jul 2010 20:11
stonemaster wrote:
It's actually easier on the cam bolt threads if the caps are tightened down the way your friend did them..BUT you have to watch that the cam is in the correct position laterally. I do them that way all the time.
well here's what happened, on both camshafts the are guides which fit into channels on the 1 & 3 cam caps, and keep the shafts from moving side to side. When re assembling, the cap was resting one the edge of the guide. Instead of tightening the left cap first which aligns the shaft, my "Friend" tightened the right one first, which held the shaft in the incorrect position. then when the left #1 cap was tightened it gradually shaved the edge of the cap guide channels OFF. luckily no other damage occurred but with this damage the cam shaft could move out of position, so the cap is now at the machine shop. Its cool when you get an extra pair of hands to help but be sure what those hands are doing... Thanx for the responses, ESPECIALLY Plummerdude LOL
It's actually easier on the cam bolt threads if the caps are tightened down the way your friend did them..BUT you have to watch that the cam is in the correct position laterally. I do them that way all the time.
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Cam Cap damage
12 Jul 2010 20:29
yea the first time we did em no problem ...what can ya say ...
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Cam Cap damage
16 Jul 2010 14:03
the local machine shop did me right again.; my boy Shawn had to make special attachment to do it but jus like new, and for $75... well out to the shop and get this bitch runnin:)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
