timing chain tensioner

  • lostkatt
  • lostkatt's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

timing chain tensioner

17 Jul 2010 07:28
#383294
I am getting ready to get rid of automatic tensioner and install manual type. How do i make sure that i have TDC on cyclinders so that i dont screw up valve timing.

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: timing chain tensioner

17 Jul 2010 07:36
#383296
Well lostkatt, what bike/yr are we talking about here?

basically, behind the ignition cover is a spark timing advacner that can be seen thru a hole in the ignition plate. It has a "T" mark on 2 sides of it taht indicate Top Dead Center for either cylinders. These marks can be lined up with the permanent case mark that is also seen thru the ignition plate hole.

Generally the 1 (1-4) "T" mark is lined up with the case mark, and your at Top Dead Center.
Then remove the old tensioner, and install the new one.
Make sure the new tensioner is backed all the way out before mounting to case.
Then turn in BY HAND until it stops just snug/not hard. back off the the bolt about 1/8th of a turn and tighten the lock nut fairly hard but not stripped!

GL!

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: timing chain tensioner

17 Jul 2010 07:37
#383297
Right hand side ignition plate cover...

Using a 17mm socket on most of the KZ's... Rotate clockwise the large nut until you see 1/4 on the "T" mark in reference to the engine case mark....

Now perform your cam timing adjustments...

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: timing chain tensioner

17 Jul 2010 09:55
#383315
Old Man Rock wrote:
Right hand side ignition plate cover...

Using a 17mm socket on most of the KZ's... Rotate clockwise the large nut until you see 1/4 on the "T" mark in reference to the engine case mark....

Now perform your cam timing adjustments...

OMR

Excellent pic.:cheer: Thanks!:kiss:

The advancer is mostly hidden from view behind the large round backing plate.

Here's what the advancer looks like.
This example has the cam style rotor for points.
Dyna-S has a rotor with an embedded magnet instead of a cam.
Oem igniter style rotor has a raised pointed area.

Same advancer may be used with different rotors.

Good Fortune! :)

1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: timing chain tensioner

17 Jul 2010 11:38
#383339
w/out ignition plate....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: timing chain tensioner

17 Jul 2010 11:40
#383340
Almost forgot... you may need this as well....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum