Engine popping

  • customkz1000
  • customkz1000's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 31
  • Thanks: 0

Engine popping

21 Jul 2010 19:54 - 21 Jul 2010 20:06
#384495
I have an intermitant engine popping going down the road. Sounds like its out of time but we just timed it. Thought maybe it was the valves. :unsure:
Last edit: 21 Jul 2010 20:06 by customkz1000.

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Engine popping

21 Jul 2010 19:57 - 21 Jul 2010 19:59
#384499
If it is just popping while your cruising, but not while accellerating (like to pass), then you likely need to adjust your mixture/air screws, as they could be set too lean after an exhaust/intake change.

If its all the time, then could be a serious air leak somewhere.

GL.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)
Last edit: 21 Jul 2010 19:59 by TeK9iNe.

Please Log in or Create an account to join the conversation.

  • customkz1000
  • customkz1000's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 31
  • Thanks: 0

Re: Engine popping

21 Jul 2010 20:15
#384505
It does it at low and midrange rpm's. Not so much at high rpm's Really noticable at about 25.

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: Engine popping

21 Jul 2010 20:21
#384507
Your low-mid range is too rich. If it was too lean it would be surging. Your needles might be set wrong or the mixture screws might be set too rich or the idle jets may be too big. I have no idea what you changed and what it was changed to.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Engine popping

21 Jul 2010 20:22
#384508
Sounds like an air leak to me. Or a clogged pilot jet/circuit.

Have you tuned the mixture/air screws?

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: Engine popping

22 Jul 2010 04:42
#384550
Outside of carb related issues....

Since you mentioned intermittent....

Points/condenser or Dyna E.I. ignition?
If P&C, when was the last time you
    changed
, especially the condensers (capacitors)....

Timing Advancer spring weak/sticking//lubbed?

Have you gone through all the electrical checks/measurements depicted in the manual?

Engine frame ideally grounded?

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Engine popping

22 Jul 2010 10:25
#384600
Might aid diagnosis to add a little choke while riding to see whether it affects the popping.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Engine popping

22 Jul 2010 18:06 - 22 Jul 2010 18:07
#384678
Patton wrote:
Might aid diagnosis to add a little choke while riding to see whether it affects the popping.

Good Fortune! :)

Ah yes! I always forget about the magical check lever, the choke.

If it gets better suddenly then you were likely lean. If it bogs right down, then you are too rich. A little bog with the choke on is normal, it shouldnt blubber and sputter though.

GL!

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)
Last edit: 22 Jul 2010 18:07 by TeK9iNe.

Please Log in or Create an account to join the conversation.

  • customkz1000
  • customkz1000's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 31
  • Thanks: 0

Re: Engine popping

22 Jul 2010 18:14
#384686
I had the carbs rebuilt. Bead blasted, ultrasonic cleaned, and oversized jets for the header and the carb pods.

Please Log in or Create an account to join the conversation.

  • customkz1000
  • customkz1000's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 31
  • Thanks: 0

Re: Engine popping

22 Jul 2010 18:16
#384688
No I haven't messed with anything since I got the carbs back.

Please Log in or Create an account to join the conversation.

  • customkz1000
  • customkz1000's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 31
  • Thanks: 0

Re: Engine popping

22 Jul 2010 18:20
#384695
Its a points ignition. It has new points and condensors. Thought I'd buy a set of wires before I did anything else.

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Engine popping

22 Jul 2010 18:40
#384715
customkz1000 wrote:
I had the carbs rebuilt. Bead blasted, ultrasonic cleaned, and oversized jets for the header and the carb pods.

Without the bike its very difficult to just "jet" a set of carbs correctly. There are lots of different perameters in engine operation and air/fuel volume requirements that affect wether to have slightly leaner or richer jets for the different carb circuits.

Try pulling your air filter out, and see if the problem goes away/improves, then you know Otto was right, I mean "ehem", you are too rich on the mid/low circuit.
If it gets flat/worse, your too lean.

To do a basic tune on the mixture screws, turn all of them 1/4 turn in or out and listen/watch the rpm. If the rpms go up, continue... turn them all more. At some point the rpm will start to drop again. Your trying to find the high spot/max rpm.

GL!

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum