plug pics opinions
- Beard
-
Topic Author
- Offline
- User
-

Registered
- Posts: 74
- Thanks: 0
plug pics opinions
22 Jul 2010 19:20 - 22 Jul 2010 19:56
79 kz650 b3
air pods 17.5 and 110's if i recall right now
stock exhaust.. 2 on each side.
cyclinders 1-4
Took the bike for a 30 min ride cruising around a couple WOT's
getting some popping from the exhaust mostly the 1,2 side on deacceleration. its much better since i adjusted all air screws to 1 1/4.
got a few pops out through the carbs to the air filters.
What is your opinion on these.. need to do something to cyl 2 obviously.
how much of a turn on each cyclinder?
am i right in thinking that i read somewhere u turn the opposite on cylinders 3&4 compared to 1&2 and achieve the same results.. enrich or lean?
1
2
3
4
air pods 17.5 and 110's if i recall right now
stock exhaust.. 2 on each side.
cyclinders 1-4
Took the bike for a 30 min ride cruising around a couple WOT's
getting some popping from the exhaust mostly the 1,2 side on deacceleration. its much better since i adjusted all air screws to 1 1/4.
got a few pops out through the carbs to the air filters.
What is your opinion on these.. need to do something to cyl 2 obviously.
how much of a turn on each cyclinder?
am i right in thinking that i read somewhere u turn the opposite on cylinders 3&4 compared to 1&2 and achieve the same results.. enrich or lean?
1
2
3
4
79 KZ650B
Jack of everything, Master of nothing.
Jack of everything, Master of nothing.
Last edit: 22 Jul 2010 19:56 by Beard.
Please Log in or Create an account to join the conversation.
- HT8R
-
- User
-

Public
- Thanks: 0
Re: plug pics opinions
22 Jul 2010 19:25
You cant get a good plug read from that short a ride. Take it out for a couple of hours at freeway speeds and a bit of round town rides. Then evaluate.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: plug pics opinions
22 Jul 2010 19:36
Popping back in the air filters is generally a sign of lean condition. That said, have you been checking all of the basics, like compression, valve clearances, Ignition timing, advancer, float levels, carb sync and cleaning, possible fuel starvation? All of the basics must be done before considering jetting adjustments. But 3 of 4 of your pics look lean.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Beard
-
Topic Author
- Offline
- User
-

Registered
- Posts: 74
- Thanks: 0
Re: plug pics opinions
22 Jul 2010 19:36 - 22 Jul 2010 19:42
well this was my first ride over 35mph and off the residental housing plan roads.
me going for an hour long ride on a highway will take some time
these plugs were all mostly black before.. so i guess the bike was ridden long and hot enough to clean up the plugs?
i have yet to fine sync the carbs.. this is all a learning process for me. have about 40 miles under my belt.
i have had the carbs all apart / points switched to dyna s ignition / timed /compression
do i turn the air screws in or out to enrich.. and is it the opposite on cyl 3&4 compared to 1&2?
thanks
me going for an hour long ride on a highway will take some time
these plugs were all mostly black before.. so i guess the bike was ridden long and hot enough to clean up the plugs?
i have yet to fine sync the carbs.. this is all a learning process for me. have about 40 miles under my belt.
i have had the carbs all apart / points switched to dyna s ignition / timed /compression
do i turn the air screws in or out to enrich.. and is it the opposite on cyl 3&4 compared to 1&2?
thanks
79 KZ650B
Jack of everything, Master of nothing.
Jack of everything, Master of nothing.
Last edit: 22 Jul 2010 19:42 by Beard.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: plug pics opinions
22 Jul 2010 19:42
Doesn't sound enough for a plug reading, remember that as you want to make adjustments you need to make the carb's stay in the range you want too look at. So if you want to look a the needles then you should avoid Idle and WOT. Etc.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Beard
-
Topic Author
- Offline
- User
-

Registered
- Posts: 74
- Thanks: 0
Re: plug pics opinions
22 Jul 2010 19:46
basically im trying to get this bike safe and reliable per se while i learn how to ride.
79 KZ650B
Jack of everything, Master of nothing.
Jack of everything, Master of nothing.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: plug pics opinions
22 Jul 2010 22:17basically im trying to get this bike safe and reliable per se while i learn how to ride.
Safe. Reliable.
I think the best advice, is to get the manual.
There is some 20+ pages of maintenence material to go through and perform, before you start dinking with the carbs. This is of course, up to you.
To answer your question, the screws all perform the same operation. If they are closest to the engine half of the carb, they are a mixture screw, and out is richer/in leaner. If closest to air box/pod side of carb, they are an air screw, out is leaner/in richer.
If your carbs are nice and clean/proper fuel levels/mix screws same, then there is something going on in the #2 cylinder.
What were your compression #s?
Have the valve gaps been checked?
Fuel levels checked?
Strong spark on all 4 cyl?
GL.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- loudhvx
-
- Offline
- KZr Legend
-

Registered
- Posts: 10863
- Thanks: 1622
Re: plug pics opinions
22 Jul 2010 23:07
HT8R wrote:
I agree, especially if the plugs were not new to start out. We didn't see a "before" so it's hard to judge the "after" without new plugs.
You cant get a good plug read from that short a ride. Take it out for a couple of hours at freeway speeds and a bit of round town rides. Then evaluate.
I agree, especially if the plugs were not new to start out. We didn't see a "before" so it's hard to judge the "after" without new plugs.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
