Shim decision thick or thin.
- dshelly
-
Topic Author
- Offline
- User
-

Registered
- Posts: 258
- Thanks: 5
Shim decision thick or thin.
23 Jul 2010 08:22
Hi all,
I am currently checking my valve clearances on my '78 kz1000A2 and found #1 intake a little tight. Can't get a .002 feeler gauge in it. However I can spin the bucket. The shim in it is a 2.25 but I don't have a 2.2 to replace it with. I do have A 2.15 I really want to get it going so I can ride this weekend. So Is 2.15 too thin or should I put the 2.25 back in untill I get a 2.2?
I am currently checking my valve clearances on my '78 kz1000A2 and found #1 intake a little tight. Can't get a .002 feeler gauge in it. However I can spin the bucket. The shim in it is a 2.25 but I don't have a 2.2 to replace it with. I do have A 2.15 I really want to get it going so I can ride this weekend. So Is 2.15 too thin or should I put the 2.25 back in untill I get a 2.2?
Occupation:Machinist 25+ exp.
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: Shim decision thick or thin.
23 Jul 2010 09:35
2.15 should be perfect.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- dshelly
-
Topic Author
- Offline
- User
-

Registered
- Posts: 258
- Thanks: 5
Re: Shim decision thick or thin.
23 Jul 2010 09:44
That's what I Put in. Now it takes a .005 feeler gauge and runs fine. I usually like from .003 to .004 but .001 won't hurt anything.
Occupation:Machinist 25+ exp.
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
'77 Kz1000B1
'78 Kz1000A2
'76 Kz900LTD
Please Log in or Create an account to join the conversation.
- Jeff.Saunders
-
- Offline
- Vendor
-

Vendors
- Posts: 1238
- Thanks: 149
Re: Shim decision thick or thin.
23 Jul 2010 11:04
Originally Kawasaki recommended 2-4 thou clearance on these bikes, but adjusted this to 2-6 thou in later maintenance releases.
On my bikes I prefer to go slightly wide rather than tight - and will NEVER leave clearance under 3 thou. I try to get around 3.5 to 4.5 thou clearance where possible.
On my bikes I prefer to go slightly wide rather than tight - and will NEVER leave clearance under 3 thou. I try to get around 3.5 to 4.5 thou clearance where possible.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
