alternator rotor pullin'? '79 KZ1000
- seanbarney41
-
Topic Author
- Offline
- User
-

Registered
- '79 kz1000 LTD '75 Honda CB750
- Posts: 438
- Thanks: 23
alternator rotor pullin'? '79 KZ1000
31 Jul 2010 12:42
Well I know the trick of using a ball bearing and the fork cap bolt/axle for a puller but I don't have a ball bearing and it is inconvenient to pull those bolts right now. I devised a gear puller rig with a little 1/4" socket extension inserted into the bolt hole and a three armed gear puller hooked on the back of the starter clutch. Does anyone know if this will FSU?
Please Log in or Create an account to join the conversation.
- seanbarney41
-
Topic Author
- Offline
- User
-

Registered
- '79 kz1000 LTD '75 Honda CB750
- Posts: 438
- Thanks: 23
Re: alternator rotor pullin'? '79 KZ1000
31 Jul 2010 13:37
Well, never mind. I got bored/brave and tried it. This rig popped that sucker right off a there, no sweat.
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: alternator rotor pullin'? '79 KZ1000
31 Jul 2010 17:33
if u could post a pic and brief discussion in the TECH write-up section,might help other riders with the same issue.Thanks.good job.bj
Please Log in or Create an account to join the conversation.
- seanbarney41
-
Topic Author
- Offline
- User
-

Registered
- '79 kz1000 LTD '75 Honda CB750
- Posts: 438
- Thanks: 23
Re: alternator rotor pullin'? '79 KZ1000
01 Aug 2010 15:47
I apologize for being totally ignorant of how to post a photo.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: alternator rotor pullin'? '79 KZ1000
01 Aug 2010 16:06 - 01 Aug 2010 16:09
seanbarney41 wrote:
See following post also.
[Click on image to enlarge view.]
I apologize for being totally ignorant of how to post a photo.
See following post also.
[Click on image to enlarge view.]
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 01 Aug 2010 16:09 by Patton.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: alternator rotor pullin'? '79 KZ1000
01 Aug 2010 16:07 - 01 Aug 2010 16:09
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 01 Aug 2010 16:09 by Patton.
Please Log in or Create an account to join the conversation.
- seanbarney41
-
Topic Author
- Offline
- User
-

Registered
- '79 kz1000 LTD '75 Honda CB750
- Posts: 438
- Thanks: 23
Re: alternator rotor pullin'? '79 KZ1000
01 Aug 2010 16:13 - 01 Aug 2010 16:40Did this work? Holy smokes, it did! What your seein' here... you'll probably notice that all the starter gears/parts have been removed by a previous owner, that's why I'm pullin the rotor-to replace all those parts. To do this, just remove the alternator rotor retaining bolt. Mine was a regular old right hand thread. My local bike shop had sold me a puller bolt with a left hand thread so it wouldn't work and I resorted to the pictured cave man tactics. Then I inserted a 1/4" socket extension into the bolt hole. There are probably any number of objects/small bolts/rods lyin' around your garage that will work just as well, just make sure it is long enough and thin enough to bottom against the end of the crankshaft and stick out for the threaded rod of the gear puller. I hooked the three arms of the gear puller on the back of the starter clutch. Ordinarily, I think you would have to hook the arms on the starter gear. Then just tighten up the puller. I think pullers with only 2 arms are more common and would work just as well. Mine popped right apart without excessive wrenching on the puller or bangin', cursing, wrench throwing. That guy in the upper left corner can be a mean mother- when frustrated. If he shows up in your garage be sure and keep him calm with beer.
Last edit: 01 Aug 2010 16:40 by seanbarney41.
Please Log in or Create an account to join the conversation.
- seanbarney41
-
Topic Author
- Offline
- User
-

Registered
- '79 kz1000 LTD '75 Honda CB750
- Posts: 438
- Thanks: 23
Re: alternator rotor pullin'? '79 KZ1000
01 Aug 2010 16:49
Man alive, thanks Patton. I thought I was on here to learn about KZ's, not how my damn com- poo- ta- works.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
