KZ650 overheating, in saint john, NB

  • fd2003
  • fd2003's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

KZ650 overheating, in saint john, NB

04 Aug 2010 15:06
#388181
I have a kz650 which i have put a ltd750 bottom end and a gpz750 top end. I have a dyna s ignition, when I drive around town it overheats but on the highway its fine. I have an oil cooler on the bike, the plugs are a light tan and the timing is right on the money, any suggestions.

Please Log in or Create an account to join the conversation.

  • anarki650
  • anarki650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 683
  • Thanks: 5

Re: KZ650 overheating, in saint john, NB

04 Aug 2010 15:35
#388191
If it's overheating it's got to be lean. The fact that it's overheating around town indicates that lean condition is occurring before the higher rpm ranges of highway speed. I'd try raising the needle one step on the carbs and see if it doesn't cure your woes.
09 Kawasaki ER6n
77 kz650b1 cafe rebirth project
"Being shot out of a cannon will always be better than being squeezed out of a tube, that's why God made fast motorcycles..."
Dr. Hunter S. Thompson
Omaha NE

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: KZ650 overheating, in saint john, NB

04 Aug 2010 16:19
#388201
fd2003 wrote:
I have a kz650 which i have put a ltd750 bottom end and a gpz750 top end. I have a dyna s ignition, when I drive around town it overheats but on the highway its fine. I have an oil cooler on the bike, the plugs are a light tan and the timing is right on the money, any suggestions.

How are you determining that it's overheating?

Please Log in or Create an account to join the conversation.

  • fd2003
  • fd2003's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

Re: KZ650 overheating, in saint john, NB

04 Aug 2010 18:34
#388238
when i drive for awhile it starts to run rough, then when i shut it off i cant kick it over, sometimes it kicks back on me.

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: KZ650 overheating, in saint john, NB

04 Aug 2010 18:41
#388241
Oil pressure to spec at low rpm?
Increased rpm equates to increased pressure...

Highway run equates to increased air flow over the engine... Same principle in running your engine in the garage... Need a cooling fan aimed at her....

Runs rough which way?
i.e. loss of power, misses in the ignition timing, pipes glowing red or more of electrical where coils/rectifier/regulator may be breaking down a tad....

Just a thought...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • AlienTech
  • AlienTech's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 16
  • Thanks: 0

Re: KZ650 overheating, in saint john, NB

04 Aug 2010 19:33
#388247
didn't think anything could run hot in the Fog City :)
1976 KZ900

Please Log in or Create an account to join the conversation.

  • PLUMMEN
  • PLUMMEN's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7983
  • Thanks: 104

Re: KZ650 overheating, in saint john, NB

04 Aug 2010 19:37
#388249
all right where is saint john? :laugh:
Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum