cylinder stud question?
- lewisj
-
Topic Author
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 4
cylinder stud question?
12 Aug 2010 19:57
This is a really silly question and I'm sure if I look around enough there is a thread on this somewhere, however time is valuable so here it is. I am installing APE cylinder studs. It has been so long since I removed the old ones and I can't remember if the end with the most threads goes into the case or is on top? Any other hints on installing the studs. Lube? Loc-tite? Any help is appreciated and thanks in advance.
Jim
Jim
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: cylinder stud question?
12 Aug 2010 21:36
If this is a KZ, then there are two different thread pitches. The courser one goes in the case. That should also be the longer one.
Please Log in or Create an account to join the conversation.
- lewisj
-
Topic Author
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 4
Re: cylinder stud question?
13 Aug 2010 06:47
Thanks Jay! I didn't look close enough, now that I do it's obvious.
Thanks again
Thanks again
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
