Degreeing in stock cams

  • oppie501
  • oppie501's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 28
  • Thanks: 0

Degreeing in stock cams

13 Aug 2010 08:01
#390593
Anybody degree in there stock cams on kz900/1000 engines? Just curious the effects. I have heard many degree in there stock cams to 105 centerline to give more bottom end torque. Would like to hear others experiences.

Please Log in or Create an account to join the conversation.

  • BSKZ650
  • BSKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2061
  • Thanks: 14

Re: Degreeing in stock cams

13 Aug 2010 08:30
#390598
last time I degreed stock cams, I was suprised at how far off they really were,, I dont remember the number though, bike did run a lot better.
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Degreeing in stock cams

13 Aug 2010 12:09 - 13 Aug 2010 12:10
#390666
Here's link to where may download Motorcycle Cam Degreeing for Zombies

Click > kzrider.com/index.php?option=com_docman&...d&gid=451&Itemid=108

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 13 Aug 2010 12:10 by Patton.

Please Log in or Create an account to join the conversation.

  • Jeff.Saunders
  • Jeff.Saunders's Avatar
  • Offline
  • Vendor
  • Vendor
    Vendors
  • Posts: 1238
  • Thanks: 149

Re: Degreeing in stock cams

13 Aug 2010 13:35
#390689
If you look at the service length specs for the cam chains, then do some math on that, it comes out to roughly 3-4 degrees behind the crank on exhaust, and 6-7 degrees on intake if my calculation is correct.

Those are fairly staggering numbers - esp. when you consider the drag racers are trying to get within fractions of a degree accuracy.

If you ever get a tired old high mileage Z1/KZ, just replacing the cam chain will perk the bike up a fair amount.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Degreeing in stock cams

13 Aug 2010 14:36
#390692
+1 on the cam chain.
The three bikes I've rescued got fresh cam chains.
All 3 have 26K-30K miles.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • oppie501
  • oppie501's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 28
  • Thanks: 0

Re: Degreeing in stock cams

13 Aug 2010 15:50
#390697
Thanks for the replies guys, I'm actually more interested in weather it is worth changing the lobe center from the stock 110 degrees to say 105 degrees.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Degreeing in stock cams

13 Aug 2010 17:31
#390715
I think there is a couple of recent posts about that, but do you realize the cost of adjustable gears for your cams? Then how much you will gain? If you really want a change maybe it would be better to select a different cam?
Just some suggestions.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • Becker
  • Becker's Avatar
  • Offline
  • User
  • User
    Registered
  • The Doctor Will Rise Again
  • Posts: 384
  • Thanks: 1

Re: Degreeing in stock cams

16 Aug 2010 23:39
#391565
You don't need to buy new cam gears. You just have to take a rat tail file and enlarge the holes in either direction. It doesn't take much only like an eighth of an inch.
78 KZ750B3
79 KZ400 LTD
78 KZ650C2
79 KZ650C3
78 KZ650B2A
80 KZ650F1
80 KZ650E1
81 CB750K Super Sport

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: Degreeing in stock cams

20 Aug 2010 09:42
#392473
oppie501 wrote:
Thanks for the replies guys, I'm actually more interested in weather it is worth changing the lobe center from the stock 110 degrees to say 105 degrees.

try it and let us know. just take some carfull notes about the performance before and after.B)
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • BohicaBob
  • BohicaBob's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 266
  • Thanks: 35

Re: Degreeing in stock cams

20 Aug 2010 16:29
#392564
oppie501: Years ago just for giggles, I removed the degreed Yosh R & T cams from my Z1 and replaced them with the stock cams at 102 intake and exhaust centers. As expected, the low-end was nice, making second gear almost the choice from a stop sign take off. Top end power faded before 8,500 however.

Back went in the Yosh R&T cams at 108 intake and exhaust lobe centers for great low end and top end fun.

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: Degreeing in stock cams

20 Aug 2010 17:41
#392587
Been following this and I just can't see what you'd truly gain here without performance cam upgrade degreed to their design/specifications...

Due to cam lobe heights and overlaps, a couple degrees one way or the other, what are you truly gaining...

It's not like it's going to rip you off the seat but for those true motor heads who have tried this.... A little hp increase, a tad more torque on the bottom end....what?

Hell, outside of performance cams, I would think a head job, +1 up on the valves, Port & polish would accomplish more...

Ok, through in the 29-31mm CR carbies....

Oh yeah, Kerker w/1.5" baffle...

Ah hell with it, throw in the performance cam now you've gone this far....

Now you're talkin.... :evil:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • PLUMMEN
  • PLUMMEN's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7983
  • Thanks: 104

Re: Degreeing in stock cams

20 Aug 2010 22:18
#392649
Old Man Rock wrote:
Been following this and I just can't see what you'd truly gain here without performance cam upgrade degreed to their design/specifications...

Due to cam lobe heights and overlaps, a couple degrees one way or the other, what are you truly gaining...

It's not like it's going to rip you off the seat but for those true motor heads who have tried this.... A little hp increase, a tad more torque on the bottom end....what?

Hell, outside of performance cams, I would think a head job, +1 up on the valves, Port & polish would accomplish more...

Ok, through in the 29-31mm CR carbies....

Oh yeah, Kerker w/1.5" baffle...

Ah hell with it, throw in the performance cam now you've gone this far....

Now you're talkin.... :evil:
well if youve got a solid older motor you dont want to tear into you might be suprised what a good stiff tune up and cams opening at the right time will do at a stoplight,toss a good header and a set of carbs on there and youve got a fun little daily rider.
some of us have been around long enough to remember how quickly a basically stock motored bike in the right hands can suprise the shit out of a less experianced shmuck on a better bike next to them on the right day,now go back to buffing your spark plugs! :woohoo:
Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum