oil cooler
- ron768
-
Topic Author
- Offline
- User
-

Registered
- Posts: 23
- Thanks: 1
oil cooler
20 Aug 2010 04:54
I have finally got an oil coller for my KZ1000. After I install it, how much oil do I add to the motor?
1976 KZ900 A4 , 1977 KZ650 C1 , 1978 KZ1000LTD B1 , 1978 KZ650SR D1 , 1999 ZRX1100 C3
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: oil cooler
20 Aug 2010 06:26
thats going to depend on the sizre of the cooler and how much line you ran, mine takes about 1/2 qt more to bring it up to full
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: oil cooler
20 Aug 2010 06:44
As mentioned depends on the size of your cooler installed...
Start the engine and let it warm up a little to get the oil flowing through the cooler... Shut her down, let the oil seep into the bottom crank case for a couple of minutes. As you would accomplish normally, top your oil off using your engine case window....
~ 1/2 - 3/4 quart, somewhere in there pending....
Repeat above process until window oil level to spec...
Start the engine and let it warm up a little to get the oil flowing through the cooler... Shut her down, let the oil seep into the bottom crank case for a couple of minutes. As you would accomplish normally, top your oil off using your engine case window....
~ 1/2 - 3/4 quart, somewhere in there pending....
Repeat above process until window oil level to spec...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: oil cooler
20 Aug 2010 09:28
Old Man Rock wrote:
Just an added note.
remember to level the bike before, reading the level lines on the oil level window.
As mentioned depends on the size of your cooler installed...
Start the engine and let it warm up a little to get the oil flowing through the cooler... Shut her down, let the oil seep into the bottom crank case for a couple of minutes. As you would accomplish normally, top your oil off using your engine case window....
~ 1/2 - 3/4 quart, somewhere in there pending....
Repeat above process until window oil level to spec...
Just an added note.
remember to level the bike before, reading the level lines on the oil level window.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: oil cooler
20 Aug 2010 09:32
DOH!!!!! :laugh: Yes Mark good point.... :S :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: oil cooler
20 Aug 2010 09:36 - 20 Aug 2010 09:37
It may be very obvious to us, but i thought ... Just in case.
i hope this wasnt an insult ron768 .
i hope this wasnt an insult ron768 .
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 20 Aug 2010 09:37 by mark1122.
Please Log in or Create an account to join the conversation.
- ron768
-
Topic Author
- Offline
- User
-

Registered
- Posts: 23
- Thanks: 1
Re: oil cooler
20 Aug 2010 13:17
Hey the only stupid question is the one you dont ask. Thank you everyone for your responses.
1976 KZ900 A4 , 1977 KZ650 C1 , 1978 KZ1000LTD B1 , 1978 KZ650SR D1 , 1999 ZRX1100 C3
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
