Tach Cable Leak
- bloglos
-
Topic Author
- Offline
- User
-

Registered
- Posts: 229
- Thanks: 0
Tach Cable Leak
23 Aug 2010 14:57
Apologies if this is in the wrong forum, I have a 78 KZ650 C2 with a leak right where the tach cable connects to the engine. Thanks to the some previous posts and help from Z1 Enterprises, I'm going to order the parts to fix this thing. I was just wondering, and please pardon the stupid question as I'm really not mechanically inclined, do I need to drain the oil before I pull off the tach cable?
Any advice would be greatly appreciated.
Any advice would be greatly appreciated.
78 KZ650 C2 - Runner
77 KZ650 B1 - Project
77 KZ650 B1 - Project
Please Log in or Create an account to join the conversation.
- jayw704
-
- Offline
- User
-

Registered
- Posts: 87
- Thanks: 0
Re: Tach Cable Leak
23 Aug 2010 15:00
No
1978 KZ1000
Go Loud and go fast or dont go at all!!!
Go Loud and go fast or dont go at all!!!
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Tach Cable Leak
23 Aug 2010 15:04
bloglos wrote:
It's not necessary to drain the oil before dealing with the tach drive.
On large Kaw fours, it's necessary to remove the valve cover to access the tach drive.
It's usually the seal and 0-ring(s) that need replacing.
Good Fortune!
Apologies if this is in the wrong forum, I have a 78 KZ650 C2 with a leak right where the tach cable connects to the engine. Thanks to the some previous posts and help from Z1 Enterprises, I'm going to order the parts to fix this thing. I was just wondering, and please pardon the stupid question as I'm really not mechanically inclined, do I need to drain the oil before I pull off the tach cable?
Any advice would be greatly appreciated.
It's not necessary to drain the oil before dealing with the tach drive.
On large Kaw fours, it's necessary to remove the valve cover to access the tach drive.
It's usually the seal and 0-ring(s) that need replacing.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Tach Cable Leak
23 Aug 2010 15:16
Where the tach drive is properly installed with good external o-ring (between housing and engine) and good internal seal around geared drive shaft, it should not leak at all, even without the tach cable attached.
With engine running, should just see the slotted end of the shaft spinning around with no oil leakage whatever.
Stopping the leakage by packing the cable attachment cap (with o-ring, gasket, sealant, etc.) actually allows the same leaking oil to go up into the cable instead of seeping out from the cap area, which treats the symptom but isn't the cure. At least that's the situation with the large fours.
Here are a couple of links to some good info about dealing with tach drive:
kzrider.com/index.php?option=com_kunena&...d=2&id=215073#215685
kzrider.com/index.php?option=com_kunena&...d=4&id=387077#387088
Good Fortune!
With engine running, should just see the slotted end of the shaft spinning around with no oil leakage whatever.
Stopping the leakage by packing the cable attachment cap (with o-ring, gasket, sealant, etc.) actually allows the same leaking oil to go up into the cable instead of seeping out from the cap area, which treats the symptom but isn't the cure. At least that's the situation with the large fours.
Here are a couple of links to some good info about dealing with tach drive:
kzrider.com/index.php?option=com_kunena&...d=2&id=215073#215685
kzrider.com/index.php?option=com_kunena&...d=4&id=387077#387088
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- bloglos
-
Topic Author
- Offline
- User
-

Registered
- Posts: 229
- Thanks: 0
Re: Tach Cable Leak
28 Aug 2010 13:52
Thanks for all the help. Here is one last stupid question. On the oil seal. Does the side with the tiny circular spring face towards the engine or outwards away from the engine. The old seal was so rotten I couldn't make out which way it went.
78 KZ650 C2 - Runner
77 KZ650 B1 - Project
77 KZ650 B1 - Project
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Tach Cable Leak
28 Aug 2010 13:57
The spring and seal lip face in toward the engine, holding the oil in.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
