re-using exhaust gaskets
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
re-using exhaust gaskets
27 Aug 2010 16:50
opinions ? think i may still have a tiny exhaust leak, tested using butane around collars and nothing but I hear a faint ticking after riding a couple of miles that sounds exactly like the much louder version of my previous exhaust leak, I mean exactly the same just quieter. Its not just valve noise either. I used the Suzuki gaskets which pretty muck took care of the major exhaust leak. I did not use Permatex copper on them however , should I re-use?? I do have a set of new copper stock gaskets and some used copper gaskets as well.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: re-using exhaust gaskets
27 Aug 2010 17:03
if theyre solid copper gaskets you can heat them with a torch till theyre red hot and toss in a bucket of water and reuse them,if theyre the crimped style like stock kaw gaskets pitch em
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- 79MKII
-
- Offline
- User
-

Registered
- Love Them Kaws!
- Posts: 2478
- Thanks: 44
Re: re-using exhaust gaskets
27 Aug 2010 17:09
Wow, I just walked in from the garage wondering if I can re-use those exhaust gaskets.
If they're crimped type, they'll show a seam, correct?
If they're crimped type, they'll show a seam, correct?
The Kaw List:
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: re-using exhaust gaskets
27 Aug 2010 17:12
No eBay APP ID and/or Cert ID defined in Kunena configurationHere is MY Ebay listing for a bag of 10 gaskets If they will fit yours, or others. Sorry but they come 10 in a bag, not 8 or 12, why?
330464938137
330464938137
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: re-using exhaust gaskets
27 Aug 2010 17:17
www.z1enterprises.com/detail.aspx?ID=1602
these are what i used last time, they recommend them for aftermarket headers
these are what i used last time, they recommend them for aftermarket headers
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: re-using exhaust gaskets
27 Aug 2010 17:29
Those are great gaskets. I suggest you take a couple feet of some hose, fuel line will work, and place it to your ear, but not in it. Then check for noises, especially around the suspect exhaust. Did you happen to check with a straight edge the header flanges? Torque it down in steps evenly? And a re-torque after a good run?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: re-using exhaust gaskets
27 Aug 2010 17:44
all of those, it only shows up after a couple of miles when the engine is good and warm, she's put up for the night so I may do some rechecking tomorrow, the flanges were not all in a line however the one that was really bad (the one with the BAD exhaust leak) I heated and bent back into position.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: re-using exhaust gaskets
27 Aug 2010 17:59
Mike... Visual/confirmation on the seam... YUP!
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- 79MKII
-
- Offline
- User
-

Registered
- Love Them Kaws!
- Posts: 2478
- Thanks: 44
Re: re-using exhaust gaskets
27 Aug 2010 18:53
Thanks OMR!
Wow, those suzuki gaskets look really nice. I've never tried them. They look like they might be re-usable too? Do they crush? Is there copper inside of them? Is it basically like the Kaw gaskets with the material over it? Can I keep asking questions? When will it stop? Why can't I stop now? Do I have a problem? Can someone help me?
OK, stopped it....
Wow, those suzuki gaskets look really nice. I've never tried them. They look like they might be re-usable too? Do they crush? Is there copper inside of them? Is it basically like the Kaw gaskets with the material over it? Can I keep asking questions? When will it stop? Why can't I stop now? Do I have a problem? Can someone help me?
OK, stopped it....
The Kaw List:
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: re-using exhaust gaskets
27 Aug 2010 19:01
Yea i kinda guessed that would be the case. Like I said i got copper new and old, I read somewhere of someone doubling up using a really flat one with a good one and some copper permatex with excellent results. Cant remember where though
Please Log in or Create an account to join the conversation.
- PaulsKZ1000LTD
-
- Offline
- User
-

Registered
- Posts: 17
- Thanks: 0
Re: re-using exhaust gaskets
31 Aug 2010 18:16
I used Suzuki GS550 XN85 GSX-R750 gaskets on my 82 KZ1000 LTD and overtightened the first time. They unwound like a watch spring. Second set used gasket sealer and just tightened them. No leaks and they are less than $2 apiece on Z1. Why would you reuse them?
1982 KZ1000 LTD K2. Resurrected, not restored
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
