1075cc head gasket question???
- lewisj
-
Topic Author
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 4
1075cc head gasket question???
28 Aug 2010 09:15
I am assembling the head gasket on a rebuild 1075 z1. I have a 1 piece copper gasket and also a 2 piece paper gasket with the center o-ring. Is one better than the other? If I do use the 1 piece copper gasket, can I still use the o-ring or just fill the groove with hi temp sealant? Thanks for the help!!
Jim
Jim
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: 1075cc head gasket question???
28 Aug 2010 09:24
use the 2 piece gasket,copper gasket requires each cylinder to be o ringed to seal oil leaks
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: 1075cc head gasket question???
28 Aug 2010 10:13 - 28 Aug 2010 10:15
use the 2 piece gasket,copper gasket requires each cylinder to be o ringed to seal oil leaks
You talking about the o'rings in the top of the sleeves?
You talking about the o'rings in the top of the sleeves?
Last edit: 28 Aug 2010 10:15 by APE Jay.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: 1075cc head gasket question???
28 Aug 2010 10:37
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- lewisj
-
Topic Author
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 4
Re: 1075cc head gasket question???
28 Aug 2010 11:11
I have installed o-rings in the cylinder sleeves that fit into the cases. Are there o-rings that fit between the cylinders and the head?
Jim
Jim
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
Please Log in or Create an account to join the conversation.
- lewisj
-
Topic Author
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 4
Re: 1075cc head gasket question???
28 Aug 2010 11:13
One other thing for now, do you use any gasket sealants or yamabond 4 with the 2 piece head gasket? Thanks Jim
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
Please Log in or Create an account to join the conversation.
- lewisj
-
Topic Author
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 4
Re: 1075cc head gasket question???
28 Aug 2010 11:59
One other thing for now, do you use any gasket sealants or yamabond 4 with the 2 piece head gasket? Thanks Jim
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: 1075cc head gasket question???
28 Aug 2010 12:22
install head gasket dry,fill the the groove where the o ring in center goes with silicone
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- lewisj
-
Topic Author
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 4
Re: 1075cc head gasket question???
28 Aug 2010 12:33
Thanks Plummen, sounds like a plan!
Jim
Jim
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: 1075cc head gasket question???
28 Aug 2010 21:55 - 28 Aug 2010 21:57
PLUMMEN wrote:
Have encountered thr oposite too. The o'rings in the sleeves are to control cylinder pressure. However, we have seen cases where the gasket is not soft enough and not using good studs, has caused the o'rings to hold the gasket up off the block, which lets oil pour out everywhere.
Getting copper gaskets to not leak oil is a challenge.
Spraying them with Copper Coat several times, allowing it to get tacky dry between c oats, seams to work best.
Have encountered thr oposite too. The o'rings in the sleeves are to control cylinder pressure. However, we have seen cases where the gasket is not soft enough and not using good studs, has caused the o'rings to hold the gasket up off the block, which lets oil pour out everywhere.
Getting copper gaskets to not leak oil is a challenge.
Spraying them with Copper Coat several times, allowing it to get tacky dry between c oats, seams to work best.
Last edit: 28 Aug 2010 21:57 by APE Jay.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: 1075cc head gasket question???
29 Aug 2010 06:40 - 29 Aug 2010 06:55
Unless you have to run racing compression, go with a composite head gasket.
I like this on copper gaskets
I like this on copper gaskets
Last edit: 29 Aug 2010 06:55 by larrycavan.
Please Log in or Create an account to join the conversation.
- lewisj
-
Topic Author
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 4
Re: 1075cc head gasket question???
29 Aug 2010 08:20
LarryC,
I will be running 10.5:1 compression. Sounds like the 2 piece gasket is the popular opinion so I will go with it. Do you use silicone AND the o-ring in the center groove or just one/ Also, do you use any Yamabond 4 or Sealant with the composite (Cometic)gasket? Thanks Larry , Your expertise is greatly appreciated!
Jim
I will be running 10.5:1 compression. Sounds like the 2 piece gasket is the popular opinion so I will go with it. Do you use silicone AND the o-ring in the center groove or just one/ Also, do you use any Yamabond 4 or Sealant with the composite (Cometic)gasket? Thanks Larry , Your expertise is greatly appreciated!
Jim
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm
Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
