valve stem seals
- jeffasaki
-
Topic Author
- Offline
- User
-

Registered
- Posts: 996
- Thanks: 44
valve stem seals
30 Aug 2010 23:14
Ive been riding these 900s and 1000s for about 30 years now and the first thing that fails after a rebuild is always vlv stem seals I have found that if you put the bike away HOT and not cold she will fire right up with no smoke.but if you only ride to the store and back and dont warm it up properly it will smoke the next fire up.this speaks to me of cold valves,top end.LET that old kaw warm up before you ride it.dont matter if its bronze or cast guides they all gotta warm up.JUST DO IT !!!!!!
78 Z1R
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: valve stem seals
31 Aug 2010 04:43 - 31 Aug 2010 04:46
I rebuilt mine with Viton stem seals and do not have that problem. They can withstand MUCH MUCH higher temperature variances than the OE Neoprene ones. Also the Viton will not harden as quickly as Neoprene in hot oil. At this point I would not use anything else. Unless modern technology fines a newer and better polymer.
www.pitstopperformance.com/kawasaki-z1-k...on-set-of-eight-p-31
www.pitstopperformance.com/kawasaki-z1-k...on-set-of-eight-p-31
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 31 Aug 2010 04:46 by otakar.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: valve stem seals
31 Aug 2010 05:54
Jeff, 3rd party or OEM seals?
Can't speak for Otto's Viton seals but after market in my newly build head sucked....
Do to other reasons, had Larry replace that junk with OEM, no issues after 4500 miles now...
Babbits on line was the cheapest I found, $9 each seal... Yeah spendy but get what you pay for these days....
OMR
Can't speak for Otto's Viton seals but after market in my newly build head sucked....
Do to other reasons, had Larry replace that junk with OEM, no issues after 4500 miles now...
Babbits on line was the cheapest I found, $9 each seal... Yeah spendy but get what you pay for these days....
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: valve stem seals
31 Aug 2010 11:48
Viton are aftermarket but WAYYYY better than stock.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: valve stem seals
31 Aug 2010 13:32 - 31 Aug 2010 15:27
Using Neoprene seals in the year 2010 when Viton is available, is akin to this DeLorean with vacuum tubes in its circuits and white wall tires. Yes they will both do the job, but which is better and more applicable. I bought a bulk of 60 Viton seals from Pit Stop, enough to doo all my bikes.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 31 Aug 2010 15:27 by otakar.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: valve stem seals
31 Aug 2010 14:11 - 31 Aug 2010 15:24
No eBay APP ID and/or Cert ID defined in Kunena configurationHere is some on Ebay as well, pretty good price for 1 set.
300461573544
If you want some stock ones for free send me a PM and there yours. 1 set of stock ones from a Athena set. They fit the 1000/ 1100 J motors. GONE TO BJ, He was first!
300461573544
If you want some stock ones for free send me a PM and there yours. 1 set of stock ones from a Athena set. They fit the 1000/ 1100 J motors. GONE TO BJ, He was first!
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 31 Aug 2010 15:24 by Motor Head.
Please Log in or Create an account to join the conversation.
- jeffasaki
-
Topic Author
- Offline
- User
-

Registered
- Posts: 996
- Thanks: 44
Re: valve stem seals
31 Aug 2010 17:08
They are oem seals bikes got about 24000 k since last rebiuld gonna finish off the season the way it is and do some work on it over the winter.Still runs like a champ and not too often does it get parked for the night cold anyway.Not the first time Ive encountered this condition with these bikes.
78 Z1R
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: valve stem seals
31 Aug 2010 20:03
14,912 miles... DOH!... I was thinking you meant recent like within a thousand miles or so..... :S
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- jeffasaki
-
Topic Author
- Offline
- User
-

Registered
- Posts: 996
- Thanks: 44
Re: valve stem seals
31 Aug 2010 20:34
sorry man i just wanted to sound off on my feelings for stem seals that are always the first failure point.I was drinking some good whiskey when I put the post up.I think the government should okay, give the green light into some stem seal reaserch.HA HA.
Ride on and farm out:laugh:
:lol: :silly: :side: :S :laugh:
Ride on and farm out:laugh:
78 Z1R
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
Please Log in or Create an account to join the conversation.
- eddiem
-
- Offline
- User
-

Registered
- KZR FLAG RELAY CARRIER #63
- Posts: 564
- Thanks: 34
Re: valve stem seals
31 Aug 2010 21:07
I use to run a bunch of Wisconsin motors the o-rings on the push tubes would get hard and leak I switched over to viton o-rings and never had a problem again.
Viton is great stuff.
Viton is great stuff.
1976 Kz900
1978 Kz1000
1978 Z1r
1982 Kz1100 A2
1975 Z1b-900
1975 Z1b-900
1978 Kz1000
1978 Z1r
1982 Kz1100 A2
1975 Z1b-900
1975 Z1b-900
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: valve stem seals
31 Aug 2010 22:07
jeffasaki wrote:
I agree and mine fail by time, not miles (lot of city riding). I got about 12 years out of the factory set which was something like 45k miles (?) or so. Next set failed after another 12 years but was only about 25k on those (ride less in my old age).sorry man i just wanted to sound off on my feelings for stem seals that are always the first failure point.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: valve stem seals
01 Sep 2010 05:20
The factor is "time under adverse conditions" This means exposure to chemicals and/or high temperatures, or both.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
