zn700 rebuild kit

  • 1tirefire
  • 1tirefire's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1
  • Thanks: 0

zn700 rebuild kit

03 Sep 2010 10:44
#395850
Hello, this is my first post here, and it seems like we've got some pretty knowledgeable poeple here.
So, I just bought a 1984 ltd700. Sweet bike! The bike looks like new! There is a small problem though.
No compression:(
I've been looking around for top end rebuild kits for a while and can't find anything. I also want to replace the pistons and rings(obviously). So, is there anywhere trusted by you guys to get the rebuild kit? Also, I know the 700 was only made for 2 years, and hard to find parts for. Would it be possible for me to punch it out to 750 and then use a 750 rebuild kit? Any info is much appreciated. Thanks!

Please Log in or Create an account to join the conversation.

  • Kraz1
  • Kraz1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 394
  • Thanks: 30

Re: zn700 rebuild kit

03 Sep 2010 22:27 - 03 Sep 2010 22:29
#396002
You could order up the 84 GPz750 Piston/Rings/Wrist Pins/Circlips and Bore the Block. You would just have to confirm Sleeve/Material thickness for overboring. Below are the Active Kawasaki Part #'s and current Retail Prices.

13001-1343 Std Piston MSRP: $67.11ea. X 4

13008-5046 Std Rings MSRP: $41.18ea. X 4

13002-1001 Wrist Pin MSRP: $3.94ea. X 4

92036-005 Circlip MSRP: $2.78ea. X 8

Or you could order up:

Wiseco's K810 MSRP: $664.05

With the Wiseco kit you may have to consider Re-Sleeving your Block, or finding a 750 Block to bore. Being that it's a ZN700 you may need to find out, if having to convert, that you might need the Top Case Clearanced as well.

The 750 people will confirm/deny the above paragraph.

:)
Last edit: 03 Sep 2010 22:29 by Kraz1.

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: zn700 rebuild kit

03 Sep 2010 23:51
#396009
1tirefire wrote:
...just bought a 1984 ltd700...No compression....

Hello, Rodney, and WELCOME to KZR! :)
We're glad you're here! :cheer:

If not already done, would check valve clearances.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum