Lash continues to increase...?
- TeK9iNe
-
Topic Author
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Lash continues to increase...?
05 Sep 2010 10:06 - 05 Sep 2010 10:08
As said, the valve lash on a clients machine continues to increase and every couple months in to a season he comes in and sure enough we've had to use larger shims on more than one of the valves.
Whats the deal? We've checked compression/leak and quench/heights, bolt torques. Pulled head inspected seats and valves and guides. cams are true and bearings good, no increases in spec. Everything nice an clean and runs great, just gets louder till we replace shims...???
Myself and a couple other mechanics are lost on this one. Maybe we're just tired here, but I seriuosly cant find the reason for it.
Any suggestion???
Thanks.
Whats the deal? We've checked compression/leak and quench/heights, bolt torques. Pulled head inspected seats and valves and guides. cams are true and bearings good, no increases in spec. Everything nice an clean and runs great, just gets louder till we replace shims...???
Myself and a couple other mechanics are lost on this one. Maybe we're just tired here, but I seriuosly cant find the reason for it.
Any suggestion???
Thanks.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Last edit: 05 Sep 2010 10:08 by TeK9iNe.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Lash continues to increase...?
05 Sep 2010 10:13 - 05 Sep 2010 10:14
This is one for Larry no doubt...
What was done to the head?
Valve job, new/old valves, new guides, new springs, retainers etc... or using 30 year old originals....
What was done to the head?
Valve job, new/old valves, new guides, new springs, retainers etc... or using 30 year old originals....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 05 Sep 2010 10:14 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Lash continues to increase...?
05 Sep 2010 10:59Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Lash continues to increase...?
05 Sep 2010 13:23
Obviously something is wearing somewhere. You will have to do some sleuthing and find out, where.
Not knowing the model we cant be specific.
As u know, usually the face and seats ware and the clearance shrinks.
Could the stems be getting shorter through ware?
or the shim or rocker?
Not knowing the model we cant be specific.
As u know, usually the face and seats ware and the clearance shrinks.
Could the stems be getting shorter through ware?
or the shim or rocker?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- havakaw
-
- Offline
- User
-

Registered
- Posts: 193
- Thanks: 26
Re: Lash continues to increase...?
05 Sep 2010 13:36
Very strange.Either the springs are collapsing,or the retainer holes are getting bigger.That happened to a friends Ford Cleaveland engine.Then the retainer popped and we had to change the motor.
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
'82 KZ 1100 A-2 Shafty (ex-bagger)
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Lash continues to increase...?
05 Sep 2010 17:08 - 05 Sep 2010 22:34
do you have the right retainers to go with the keepers? theres 2 differant styles on big kzs anywayyeah i meant to say valves to go with keepers folks! :S
Still recovering,some days are better than others.
Last edit: 05 Sep 2010 22:34 by PLUMMEN.
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: Lash continues to increase...?
05 Sep 2010 21:33
What are the two different keeper retainer combos?
Please Log in or Create an account to join the conversation.
- Kraz1
-
- Offline
- User
-

Registered
- Posts: 394
- Thanks: 30
Re: Lash continues to increase...?
05 Sep 2010 21:52
This keeper fits all the 7mm Kawasaki KZ valves 1973-1984 KZ900, KZ1000, J, GPz models. Order 16 for a complete set. This original Z1 900 Valves were square Keeper grooves, but all the aftermarket valves are radius keeper grooves.
Keepers
Keepers
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Lash continues to increase...?
05 Sep 2010 22:23 - 05 Sep 2010 22:31
youre right jay,i meant valve and keeper combination theres 2 of them! :laugh:
Still recovering,some days are better than others.
Last edit: 05 Sep 2010 22:31 by PLUMMEN.
Please Log in or Create an account to join the conversation.
- kzz1p
-
- Offline
- User
-

Registered
- One Test Is Worth A Thousand Expert Opinions!
- Posts: 1432
- Thanks: 3
Re: Lash continues to increase...?
06 Sep 2010 00:06
When the head was taken apart, was the valve springs and buckets put back in the same cylinder....Or were they switched to another cylinder?
Please Log in or Create an account to join the conversation.
- Jeff.Saunders
-
- Offline
- Vendor
-

Vendors
- Posts: 1238
- Thanks: 149
Re: Lash continues to increase...?
06 Sep 2010 04:47
Kraz1 wrote:
Not true at all. There are several companies making the earlier Z1 style valves. We stock 2 different brands.
www.z1enterprises.com/SearchResult.aspx?...&KeyWords=z1%20valve
www.z1enterprises.com/detail.aspx?ID=321
As to the valve clearances INCREASING.
I've only seen this with engines burning oil - the valves/seats get a layer of carbon on them.
The only other thought is whether the clearances were checked with the engine cold both times. There is a fair variance in clearance depending on engine temperature. On one of my engines, I checked the clearances hot, then again multiple times as the engine gradually cooled down. The clearances changed several thou during the cooldown.
...but all the aftermarket valves are radius keeper grooves.
Not true at all. There are several companies making the earlier Z1 style valves. We stock 2 different brands.
www.z1enterprises.com/SearchResult.aspx?...&KeyWords=z1%20valve
www.z1enterprises.com/detail.aspx?ID=321
As to the valve clearances INCREASING.
I've only seen this with engines burning oil - the valves/seats get a layer of carbon on them.
The only other thought is whether the clearances were checked with the engine cold both times. There is a fair variance in clearance depending on engine temperature. On one of my engines, I checked the clearances hot, then again multiple times as the engine gradually cooled down. The clearances changed several thou during the cooldown.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: Lash continues to increase...?
06 Sep 2010 05:37
TeK9iNe wrote:
What engine is this ?
What is the mileage between visits?
How is the bike ridden?
As someone pointed out, it sounds like a retainer issue.
As said, the valve lash on a clients machine continues to increase and every couple months in to a season he comes in and sure enough we've had to use larger shims on more than one of the valves.
Whats the deal? We've checked compression/leak and quench/heights, bolt torques. Pulled head inspected seats and valves and guides. cams are true and bearings good, no increases in spec. Everything nice an clean and runs great, just gets louder till we replace shims...???
Myself and a couple other mechanics are lost on this one. Maybe we're just tired here, but I seriuosly cant find the reason for it.
Any suggestion???
Thanks.
What engine is this ?
What is the mileage between visits?
How is the bike ridden?
As someone pointed out, it sounds like a retainer issue.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
