1980 kz650

  • ronnie chabot
  • ronnie chabot's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 15
  • Thanks: 0

1980 kz650

11 Sep 2010 17:18
#397797
hi
a friends kz650 runs fine starts good .
but for at least 10 min on choke before the two right pipes start to get hot at all.then thay do .
carbs have been cleaned.bike sat for 7 yrs.
take off with choke part way on.then it gets hot and runs ok.
any posts on this one.any help please
thanks ronnie

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: 1980 kz650

11 Sep 2010 19:20
#397831
You shouldn't need the choke on for 10 minutes. try turning it all the way off after about 3 minutes or so and see if problem persists. Could be those 2 cylinders are running way too rich with choke on and simply not heating up much. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • Mark Wing
  • Mark Wing's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1695
  • Thanks: 22

Re: 1980 kz650

11 Sep 2010 19:33
#397838
KZ650's are knone for being cold blooded.
Mark
Jesus loves you Everyone else thinks your an ***

77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.

Yorba Linda Cal.

Please Log in or Create an account to join the conversation.

  • Bluemeanie
  • Bluemeanie's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2516
  • Thanks: 15

Re: 1980 kz650

12 Sep 2010 05:27
#397962
Make sure the teenie tiny air bleed holes in the carbs are all clear. I also have a 1980 KZ650 and they came from factory with 97.5 or smaller jets so they are lean to begin with. Let us know....:)
1980 KZ650F1, Bought new out the door for $2,162.98!

Please Log in or Create an account to join the conversation.

  • H1Vindicator
  • H1Vindicator's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 909
  • Thanks: 168

Re: ----

12 Sep 2010 06:55 - 21 Feb 2013 20:46
#397971
----
Last edit: 21 Feb 2013 20:46 by H1Vindicator.

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: 1980 kz650

12 Sep 2010 07:35
#397982
1981 KZ650 OEM Service Manual, free download....
jarlef.no/Kawasaki/Series/Z/650/z650files.htm


Pretty much everything you need to learn about carbs, including your set....
kzrider.com/index.php?option=com_docman&...d&gid=461&Itemid=108

And no, 10 minutes of choke is not ideal.... Something not right in your carb operations....

Good luck...

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: 1980 kz650

12 Sep 2010 09:09
#397997
Wouldn't hurt to verify compression #'s also.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum