carbon build up valves
- tmstoltz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 21
- Thanks: 0
carbon build up valves
18 Sep 2010 10:07
My bike had been hard to start when cold, low comp.not rings, im sure its the valves, when it warms up the comp. is 120 to 125 per cylender. when cold 40 to 50 psi. i have been putting 85 octain gas in it, my friend said posibly carbon build up around the valves. is there a good additive that will clean them? and what all should i do, octain boost, add a lot of cleaner to the tank.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: carbon build up valves
18 Sep 2010 10:20
If not already done, thinking a leak-down test could be helpful toward diagnosis.
Good Fortune!
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: carbon build up valves
18 Sep 2010 10:31
Engine Chemicals
Mopar Combustion Chamber Cleaner # 04318001. Designed to remove carbon from combustion chambers & valves.
www.amazon.com/Yamaha-Ring-Additive-32oz...-32-00/dp/B002GUCLH2 (Yamaha Ring Free)
Yamaha Carb Cleaner # ACC-CARBC-LE-NR
Mopar Combustion Chamber Cleaner # 04318001. Designed to remove carbon from combustion chambers & valves.
www.amazon.com/Yamaha-Ring-Additive-32oz...-32-00/dp/B002GUCLH2 (Yamaha Ring Free)
Yamaha Carb Cleaner # ACC-CARBC-LE-NR
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: carbon build up valves
18 Sep 2010 11:49
You can do the Seafoam thing on the engine when it's hot. Draw it in through the intake vacuum lines and let it sit ten minutes, then run it. It will blow a ton of carbon out.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: carbon build up valves
18 Sep 2010 12:29
tmstoltz wrote:
A properly tuned engine will continue to run for many years if not abused, and the jetting is correct. I would deffinately fix the condition causing this issue, rather than throw a band-aid on the resulting problem.
Could be a combination of too rich at a comonly used throttle position, and oil leaking past valve seals, making for a nasty combo piling up on the valves/seats.
You can just pull off the carbs/header and have a look with a mini mirror and flashlight.
Or... you can just throw some crap in the tank every so often! :laugh:
Good luck!
My bike had been hard to start when cold, low comp.not rings, im sure its the valves, when it warms up the comp. is 120 to 125 per cylender. when cold 40 to 50 psi. i have been putting 85 octain gas in it, my friend said posibly carbon build up around the valves. is there a good additive that will clean them? and what all should i do, octain boost, add a lot of cleaner to the tank.
A properly tuned engine will continue to run for many years if not abused, and the jetting is correct. I would deffinately fix the condition causing this issue, rather than throw a band-aid on the resulting problem.
Could be a combination of too rich at a comonly used throttle position, and oil leaking past valve seals, making for a nasty combo piling up on the valves/seats.
You can just pull off the carbs/header and have a look with a mini mirror and flashlight.
Or... you can just throw some crap in the tank every so often! :laugh:
Good luck!
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: carbon build up valves
18 Sep 2010 13:13
somebody get otto on the stage! :woohoo:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: carbon build up valves
18 Sep 2010 13:19
Otto's Ointments for Ornery Engines--thats what we need.bj
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: carbon build up valves
18 Sep 2010 14:01
take it out on the highway and run the hell out of it hard,that will clean the ol carbon out of her!
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: carbon build up valves
18 Sep 2010 14:11 - 18 Sep 2010 18:22
No eBay APP ID and/or Cert ID defined in Kunena configurationSince I will never live you guys down, than here it is.
:lol:
Please follow the instructions in this thread.
kzrider.com/index.php?option=com_kunena&...ew&catid=2&id=369254
EDIT
Here is a reprint of my instructions on how to properly use the "Combustion Chamber Cleaner.
All of the following items will do the job the same way. I bought a case from the eBay seller because it was the most inexpensive.
This is what I do. The best way to use the "spray" combustion chamber cleaner" is to;
1) heat up the engine to full operational temperature.
2) remove the spark plugs while hot.
3) Set pistons "about" half way between TDC and BDC.
4) Spray in the cleaner until it comes out the hole.
5) replace the spark plugs immediately.
6) wait until the engine cools down, or till next morning.
7) go for a VERY BRISK ride for about half an hour.
repeat step 1-7, 3-4 times.
Now you have a clean engine
9) use the Lucas in every tank.
10) step 1-7 may or may not be required about every 10,000 mi dependent on how much oil you burn. This is what my pistons looked like after more than 24,000 miles after doing steps 1-8.
Please follow the instructions in this thread.
kzrider.com/index.php?option=com_kunena&...ew&catid=2&id=369254
EDIT
Here is a reprint of my instructions on how to properly use the "Combustion Chamber Cleaner.
All of the following items will do the job the same way. I bought a case from the eBay seller because it was the most inexpensive.
This is what I do. The best way to use the "spray" combustion chamber cleaner" is to;
1) heat up the engine to full operational temperature.
2) remove the spark plugs while hot.
3) Set pistons "about" half way between TDC and BDC.
4) Spray in the cleaner until it comes out the hole.
5) replace the spark plugs immediately.
6) wait until the engine cools down, or till next morning.
7) go for a VERY BRISK ride for about half an hour.
Now you have a clean engine
9) use the Lucas in every tank.
10) step 1-7 may or may not be required about every 10,000 mi dependent on how much oil you burn. This is what my pistons looked like after more than 24,000 miles after doing steps 1-8.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 18 Sep 2010 18:22 by otakar.
Please Log in or Create an account to join the conversation.
- tmstoltz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 21
- Thanks: 0
Please Log in or Create an account to join the conversation.
- tmstoltz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 21
- Thanks: 0
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: carbon build up valves
18 Sep 2010 16:30
otakar wrote:
:laugh:
Since I will never live you guys down, than here it is.:lol:
Please follow the instructions in this thread.
kzrider.com/index.php?option=com_kunena&...ew&catid=2&id=369254
:laugh:
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
