Disabling exhaust air injection system
- Patton
-
Topic Author
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Disabling exhaust air injection system
14 Oct 2010 13:49
When plugging or connecting nipples on exhaust emission cover plates (or when nippled stock plates are replaced with non-nippled after-market plates), is there any reason to retain the valves under the plates? 
Am thinking both U.S. and Canadian models use the same cylinder head, whereby a U.S. valve cover could be replaced with a Canadian valve cover (without issue of absent valves).
Thoughts?
Good Fortune!
Am thinking both U.S. and Canadian models use the same cylinder head, whereby a U.S. valve cover could be replaced with a Canadian valve cover (without issue of absent valves).
Thoughts?
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- muddy1
-
- Offline
- User
-

Registered
- 1980 Kz1000 LTD B4
- Posts: 136
- Thanks: 0
Re: Disabling exhaust air injection system
14 Oct 2010 14:22
I would think that you could ditch the reeds/valves, I did, the (2) hole's in the valve cover itself can be blocked off, via a threaded bolt. It keeps any carbon if any from making the underside of your shiny aluminum (reads APE) covers dirty...
1970 SL-70
1972 CB 750
1973 Z1
1976 YZ 125
1976 KZ400
1979 KZ400 LTD
1980 KZ1000 LTD B4
1984 YZ 490
1989 750 Ninja
1972 CB 750
1973 Z1
1976 YZ 125
1976 KZ400
1979 KZ400 LTD
1980 KZ1000 LTD B4
1984 YZ 490
1989 750 Ninja
Please Log in or Create an account to join the conversation.
- Patton
-
Topic Author
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Disabling exhaust air injection system
14 Oct 2010 14:40
muddy1 wrote:
the (2) hole's in the valve cover itself can be blocked off, via a threaded bolt. --- not understanding what holes.
Do the holes show in this pic?
I would think that you could ditch the reeds/valves, I did, the (2) hole's in the valve cover itself can be blocked off, via a threaded bolt. It keeps any carbon if any from making the underside of your shiny aluminum (reads APE) covers dirty...
the (2) hole's in the valve cover itself can be blocked off, via a threaded bolt. --- not understanding what holes.
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- muddy1
-
- Offline
- User
-

Registered
- 1980 Kz1000 LTD B4
- Posts: 136
- Thanks: 0
Re: Disabling exhaust air injection system
14 Oct 2010 15:49
the holes do not show in the picture, it is tough to see from all the carbon buildup, but the hole is almost tunnel like, it's at an angle (man I hope you are not messing with me :laugh: )
1970 SL-70
1972 CB 750
1973 Z1
1976 YZ 125
1976 KZ400
1979 KZ400 LTD
1980 KZ1000 LTD B4
1984 YZ 490
1989 750 Ninja
1972 CB 750
1973 Z1
1976 YZ 125
1976 KZ400
1979 KZ400 LTD
1980 KZ1000 LTD B4
1984 YZ 490
1989 750 Ninja
Please Log in or Create an account to join the conversation.
- Patton
-
Topic Author
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Disabling exhaust air injection system
14 Oct 2010 16:05 - 14 Oct 2010 16:12
muddy1 wrote:
Nope, no messing --- and thanks for the responses.
The earlier pic is from an ebay listing.
Just found this more detailed pic showing the holes;
And a diagram of the CAS (Clean Air System), shown in the following post.
Might be incorrect about the Canadian model having same head as U.S. model, but thinking kawasaki.com says they're the same.
Perhaps the Canadian model heads also have the air passages (unused) from the valve cover to the exhaust valves.
Good Fortune!
the holes do not show in the picture, it is tough to see from all the carbon buildup, but the hole is almost tunnel like, it's at an angle (man I hope you are not messing with me :laugh: )
Nope, no messing --- and thanks for the responses.
The earlier pic is from an ebay listing.
Just found this more detailed pic showing the holes;
And a diagram of the CAS (Clean Air System), shown in the following post.
Might be incorrect about the Canadian model having same head as U.S. model, but thinking kawasaki.com says they're the same.
Perhaps the Canadian model heads also have the air passages (unused) from the valve cover to the exhaust valves.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 14 Oct 2010 16:12 by Patton.
Please Log in or Create an account to join the conversation.
- Patton
-
Topic Author
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Disabling exhaust air injection system
14 Oct 2010 16:10 - 14 Oct 2010 16:13
The best pic I've yet to find explaining air flow on Kaw's CAS.
[Click on image to enlarge view.]
Good Fortune!
[Click on image to enlarge view.]
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 14 Oct 2010 16:13 by Patton.
Please Log in or Create an account to join the conversation.
- Patton
-
Topic Author
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Disabling exhaust air injection system
14 Oct 2010 16:49
Patton wrote:
Good Fortune!
...Perhaps the Canadian model heads also have the air passages (unused) from the valve cover to the exhaust valves....
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
