Another Head gasket question...

  • John T
  • John T's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 83
  • Thanks: 2

Another Head gasket question...

26 Oct 2010 18:31
#409265
GPZ1100 head gaskets....
Are they all the same? 1100 gpz is a 72mm bore.. j engine... right?

according to the kawasaki website, I am getting different part #'s for each year...
are they all the same, just different part #'s?

1982- 11004-1105
1983- 11004-1104
1984- 11004-1119

:huh:
True Wisdom Only Comes From Pain.

Please Log in or Create an account to join the conversation.

  • John T
  • John T's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 83
  • Thanks: 2

Re: Another Head gasket question...

26 Oct 2010 18:41
#409268
Another thing ....

What is it with the 1984 GPZ1100???

you go to Bikebandit and search 84 gpz1100 and they show no listing for that year...
I am finding that at a lot of sites...
plenty of listings for 82-83 gpz1100 but no 84
was this a limited year or something?

I'm just wanting to know if the 82-83 1100 is the same engine.. ?
:huh:
True Wisdom Only Comes From Pain.

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Another Head gasket question...

26 Oct 2010 21:12 - 26 Oct 2010 21:19
#409329
John T wrote:
Another thing ....

What is it with the 1984 GPZ1100???

you go to Bikebandit and search 84 gpz1100 and they show no listing for that year...
I am finding that at a lot of sites...
plenty of listings for 82-83 gpz1100 but no 84
was this a limited year or something?

I'm just wanting to know if the 82-83 1100 is the same engine.. ?
:huh:

83 is a revised motor. Larger wrist pins, new head and trans modifications.

83 - 85 motors should be the same but gasket kits are different part numbers for the 84 motor. See below.

82 is pretty much just an 1100cc J with hotter cams and DFI.

81 had injector port locations in the head casting and analog fuel injection setup.

www.flowbenchtech.com/porting/CRH/kz-data.htm

Regarding gaskets, there are 2 listings for gaskets sets for the motors. APE lists 81-83 as one set and the 84 as another set. 84 set costs a bunch more. I'm not sure what's different between the two sets.
Last edit: 26 Oct 2010 21:19 by larrycavan.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum