Cam Timing marks

  • jbrewer73
  • jbrewer73's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 59
  • Thanks: 0

Cam Timing marks

13 Nov 2010 18:18 - 13 Nov 2010 18:22
#412574
I am completing my first rebuild btu have a question about the cam marks. When i removed the valve cover I took photos of the cam positioning at "T" 1/4 to reference when i reassmble. When referencing the manual my cam marks do not look like what the book is showing me. I know the timing was fine cuz the bike ran and started fine. So I was thinking to reassemble the way they came out.

Can someone tell me if this is normal to cam marks positioned differently than the manuals instruction?

Thanks in advance.

Attachment cam_pics.doc not found

Last edit: 13 Nov 2010 18:22 by jbrewer73.

Please Log in or Create an account to join the conversation.

  • TerryK
  • TerryK's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 607
  • Thanks: 2

Re: Cam Timing marks

13 Nov 2010 20:07
#412608
Hard to tell for sure from the picture but it looks like you might be on the wrong stroke. Rotate the engine 360 degrees and check again.
1977 KZ1000
GSXR swingarm and rear brake
WM6 rear Akront rim
Wiseco 1075c pistons
33 smoothbores
stage 3 Web Cams
Head porting
Dyna S ignition
Lockhart oil cooler
Wiseco header



1980 Z1R drag bike
1200cc
38 Flatslides, .
500' cams
7" slick
Dyan 4000 SP ignition
etc

Ontario, Canada

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Cam Timing marks

13 Nov 2010 20:09
#412609
the cams are 180 degrees out rotate it around one more time like terry says
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • jbrewer73
  • jbrewer73's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 59
  • Thanks: 0

Re: Cam Timing marks

14 Nov 2010 05:42
#412644
I see what you guys are saying. Just to clarify the pics I have posted are before I disassembled and is where they were at when set at "T" 1/4??? So I was thinking of positioning them the same way being the bike ran fine before tear down.

Please Log in or Create an account to join the conversation.

  • andy9802gt
  • andy9802gt's Avatar
  • Offline
  • User
  • User
    Registered
  • If it tastes that good, eat it yourself.
  • Posts: 695
  • Thanks: 19

Re: Cam Timing marks

14 Nov 2010 08:00
#412663
You'll hit the T mark on 1/4 and be 180 out if you're on the exhaust stroke. Put it back together the way the manual says to the first time or you'll be taking it apart to do it like the manual says the second time.:blink:
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm

Please Log in or Create an account to join the conversation.

  • jbrewer73
  • jbrewer73's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 59
  • Thanks: 0

Re: Cam Timing marks

15 Nov 2010 14:46
#412906
I am going to follow the book but what i am trying to figure out is why my cams were positioned the way they are in the pic i posted. Before disassembly I used a 17mm wrench, rotated to "T" 1/4, removed the valve cover and took pics of the cam positioning and they looked how you see them in the pics. How did this bike even run is what i am trying to figure out.

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: Cam Timing marks

15 Nov 2010 15:32
#412915
jbrewer73 wrote:
I am going to follow the book but what i am trying to figure out is why my cams were positioned the way they are in the pic i posted. Before disassembly I used a 17mm wrench, rotated to "T" 1/4, removed the valve cover and took pics of the cam positioning and they looked how you see them in the pics. How did this bike even run is what i am trying to figure out.

they only look like the book every other time around....just follow the manual and you will be fine...
if you had done another 360 degree spin on the before pic, it would have looked just like the book....you re good...

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum