Engine cuts out at 90

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Engine cuts out at 90

16 Nov 2010 11:39
#413017
So i have been working on my 76 kz750 for a few years now. tweaking this and that. I installed an electric igntion system and bought a new timing advancer to fit it right. It runs great but could probably use a vacum sync on the carbs. When i get it on the hiway I can pull up to 90 strong, but as soon as I hit that mark, one of the cylinders cuts out. The one time that i pushed it far in 4th it seemed like it past it, but then I had to shift and hit 90 again and it cut out. Any thoughts? I was thinking timing but I cant be sure.
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

  • John T
  • John T's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 83
  • Thanks: 2

Re: Engine cuts out at 90

16 Nov 2010 12:12
#413020
just a wild though...

have you changed the gearing drastically?

maybe your hitting the limiter.
True Wisdom Only Comes From Pain.

Please Log in or Create an account to join the conversation.

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Re: Engine cuts out at 90

16 Nov 2010 12:17
#413024
I changed to a 630 chain and sprockets, but didnt change the sizes really. Tried to keep it the same.
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: Engine cuts out at 90

16 Nov 2010 13:06
#413027
John T wrote:
just a wild though...

have you changed the gearing drastically?

maybe your hitting the limiter.

No limiter to hit :)

Pull the sediment bowl off the bottom of the petcock (it unscrews) and see if it has crap in it. Take the petcock off the tank and make sure there is nothing blocking the screen. If that doesn't fix it then check the spark plug caps and wires for resistance.
KD9JUR

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: Engine cuts out at 90

16 Nov 2010 13:09
#413028
KZCool wrote:
I changed to a 630 chain and sprockets, but didnt change the sizes really. Tried to keep it the same.

Why did you change from a 530 to a 630?????
Cost more money and it slows the bike down.

Free chain and sprockets or something?
KD9JUR

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Engine cuts out at 90

16 Nov 2010 16:59
#413070
KZCool wrote:
...installed an electric igntion system....new timing advancer to fit it right...can pull up to 90 strong, but as soon as I hit that mark, one of the cylinders cuts out. The one time that i pushed it far in 4th it seemed like it past it, but then I had to shift and hit 90 again and it cut out....
Imo, it's not the carb sync.

If not done lately, would:

check and assure correct valve clearances;

perform clear tube test to assure correct fuel level inside the float bowls

install correct new spark plugs;

assure battery is fully charged and passes load test;

assure that battery rerminal connections are clean and snug;

assure integrity of connection where negative battery cable attaches to rear of engine;

assure full battery voltage is reaching coil primary terminals when ignition switch is ON.

Good Fortune!:)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • testarossa
  • testarossa's Avatar
  • Offline
  • User
  • User
    Registered
  • Attack life, it's only trying to kill you.
  • Posts: 3673
  • Thanks: 83

Re: Engine cuts out at 90

16 Nov 2010 18:40
#413087
Patton wrote:
KZCool wrote:
...installed an electric igntion system....new timing advancer to fit it right...can pull up to 90 strong, but as soon as I hit that mark, one of the cylinders cuts out. The one time that i pushed it far in 4th it seemed like it past it, but then I had to shift and hit 90 again and it cut out....
Imo, it's not the carb sync.

If not done lately, would:

check and assure correct valve clearances;

perform clear tube test to assure correct fuel level inside the float bowls

install correct new spark plugs;

assure battery is fully charged and passes load test;

assure that battery rerminal connections are clean and snug;

assure integrity of connection where negative battery cable attaches to rear of engine;

assure full battery voltage is reaching coil primary terminals when ignition switch is ON.

Good Fortune!:)

+1 This is always good advice.

Are we talking about 90mph or 90kph? If 90mph, isn't that real close to the top speed for a KZ750 twin? Considering 34 years of wear, maybe that's all the old girl has to give. Have you checked compression on this motor recently?
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN

Please Log in or Create an account to join the conversation.

  • Becker
  • Becker's Avatar
  • Offline
  • User
  • User
    Registered
  • The Doctor Will Rise Again
  • Posts: 384
  • Thanks: 1

Re: Engine cuts out at 90

17 Nov 2010 09:08
#413159
I have a 78 750 twin and it indicates 116 when its topped. I can almost hold with a well tuned 650. You need to narrow down what is making the cylinder cut out.

What kind of electric ignition did you switch to and what kind of advance mechanism. It's possible that you got isn't the right advance mechanism.

If you have a timing light then you could hook the leads up to one cylinder and try to get past 90. Watch the light to see if it cuts out which would mean you are losing spark at high RPM. Then try the other cylinder.
78 KZ750B3
79 KZ400 LTD
78 KZ650C2
79 KZ650C3
78 KZ650B2A
80 KZ650F1
80 KZ650E1
81 CB750K Super Sport

Please Log in or Create an account to join the conversation.

  • muddy1
  • muddy1's Avatar
  • Offline
  • User
  • User
    Registered
  • 1980 Kz1000 LTD B4
  • Posts: 136
  • Thanks: 0

Re: Engine cuts out at 90

17 Nov 2010 16:27
#413206
a wind problem bending ignition wires? Fuel line too long and getting a kink in it (happened on my 750 ninja) I installed a fancy glass see thru fuel filter, and the fuel line was not short enough...
1970 SL-70
1972 CB 750
1973 Z1
1976 YZ 125
1976 KZ400
1979 KZ400 LTD
1980 KZ1000 LTD B4
1984 YZ 490
1989 750 Ninja

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Engine cuts out at 90

17 Nov 2010 16:51
#413208
It's probably the fetzer diode isolator relay. I've seen this a thousand time :laugh: All 4 failed on my bike one summer and it drove me nuts for weeks.

Harbor freight had 3 but could't get me the 4th. Luckily I was shopping with the wife at Home Depot for a new refrigerator. As luck would have it, I happened to be walking down the aisle of electrical supplies and there was an entire shelf of fetzer diode isolator relays.

Unfortunately they were the reversed polarity type :( As i stood there pondering how to overcome the problem, the wife hauls her electric compact out her purse and suggests using the same technique the Korean's used to light up the compact... it was so simple.... Boy did I ever feel dumb :woohoo:

So the moral of the story is pretty simple. When in doubt, the answer can often be found in a womans purse ;)

This has been a public service announcement :kiss:

Please Log in or Create an account to join the conversation.

  • tachrev
  • tachrev's Avatar
  • Offline
  • User
  • User
    Registered
  • Rubber Side Goes Down
  • Posts: 335
  • Thanks: 11

Re: Engine cuts out at 90

17 Nov 2010 17:23
#413218
larrycavan wrote:
It's probably the fetzer diode isolator relay. I've seen this a thousand time :laugh: All 4 failed on my bike one summer and it drove me nuts for weeks.

Harbor freight had 3 but could't get me the 4th. Luckily I was shopping with the wife at Home Depot for a new refrigerator. As luck would have it, I happened to be walking down the aisle of electrical supplies and there was an entire shelf of fetzer diode isolator relays.

Unfortunately they were the reversed polarity type :( As i stood there pondering how to overcome the problem, the wife hauls her electric compact out her purse and suggests using the same technique the Korean's used to light up the compact... it was so simple.... Boy did I ever feel dumb :woohoo:

So the moral of the story is pretty simple. When in doubt, the answer can often be found in a womans purse ;)

This has been a public service announcement :kiss:

Dude, you've been hanging out with nads or something?
1977 Kawasaki KZ1000 : Street/Strip
Build Thread

Please Log in or Create an account to join the conversation.

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Re: Engine cuts out at 90

22 Nov 2010 11:22
#413797
Why did you change from a 530 to a 630?????
Cost more money and it slows the bike down.

Free chain and sprockets or something?[/quote]

I thought that i wanted to change it to a certain gearing, but then I had it all messed up and had a 630 rear sprocket with what I thought was the right amount of teeth with the right amount of teeth and couldnt find a 530 with the same. in the end i only ended up with a slightly larger front sprcket when i was hopping for a much smaller rear. Plus i fugured the heavy duty chain should last for a lot longer.
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum