Engine knocking noise
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Engine knocking noise
22 Nov 2010 10:35
Hey guys, my 78 kz650 SR D makes a noticable knocking and clacking noise when it first starts up cold. At cold, low-RPM idle, it is very noticable, and on the center stand I can feel the knocking vibrating through the ground. Once it warms up, the noise goes away and the motor runs great, until I turn the motor off. Then you can hear it clack and clock as the motor turns off.
Any ideas as to what this could be? It's very embarrasing and annoying.
Any ideas as to what this could be? It's very embarrasing and annoying.
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Engine knocking noise
22 Nov 2010 10:46
Omaha Rider wrote:
I have gotten the cam chain adjusted and it still makes the same noise.
Hey guys, my 78 kz650 SR D makes a noticable knocking and clacking noise when it first starts up cold. At cold, low-RPM idle, it is very noticable, and on the center stand I can feel the knocking vibrating through the ground. Once it warms up, the noise goes away and the motor runs great, until I turn the motor off. Then you can hear it clack and clock as the motor turns off.
Any ideas as to what this could be? It's very embarrasing and annoying.
I have gotten the cam chain adjusted and it still makes the same noise.
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Engine knocking noise
22 Nov 2010 11:47
A "click" is usually a loose valve. A "clack" is usually a rod bearing but it might be the primary drive chain slapping on things as it bounces around.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Engine knocking noise
22 Nov 2010 12:11
Primary drive chain?? Where is this located?
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- JR
-
- Offline
- Sustaining Member
-

Registered
- Posts: 2981
- Thanks: 500
Re: Engine knocking noise
22 Nov 2010 12:58
Sounds like the primary drive chain. It connects the crank shaft with some other shaft. Dont worry. Just synch the carbs. Maybe bring the idle up to 1100 or so
1980 kz750E1, Delkevic exhaust
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: Engine knocking noise
22 Nov 2010 12:58
Omaha Rider wrote:
The primary chain is located in the approximate center of the motor and connects the crank to the secondary shaft that in turn drives the clutch.
Primary drive chain?? Where is this located?
The primary chain is located in the approximate center of the motor and connects the crank to the secondary shaft that in turn drives the clutch.
KD9JUR
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Engine knocking noise
23 Nov 2010 10:27
Can I put this seat:
cgi.ebay.com/ebaymotors/OEM-Kawasaki-KZ6...&hash=item3ef5716d74
And this fender:
cgi.ebay.com/ebaymotors/KAWASAKI-KZ650-S...&hash=item53e496ad88
On my 78 Kz650 SR D?
cgi.ebay.com/ebaymotors/OEM-Kawasaki-KZ6...&hash=item3ef5716d74
And this fender:
cgi.ebay.com/ebaymotors/KAWASAKI-KZ650-S...&hash=item53e496ad88
On my 78 Kz650 SR D?
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Engine knocking noise
23 Nov 2010 11:10
try doing a carb sync lots of times the motor running uneven at low rpm will cause noises in the primary drive or in the clutch basket.also what rpm does your engine idle at.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Engine knocking noise
23 Nov 2010 11:26 - 23 Nov 2010 11:29
Omaha Rider wrote:
Am pretty sure that neither of these would fit your 78 Kz650 SR D.
At least not as simple bolt-on replacements.
Fitment would likely entail frame alterations.
Perhaps someone having actual experience with this situation will come along to offer better or different advice.
Good Fortune!
Can I put this seat:
cgi.ebay.com/ebaymotors/OEM-Kawasaki-KZ6...&hash=item3ef5716d74
And this fender:
cgi.ebay.com/ebaymotors/KAWASAKI-KZ650-S...&hash=item53e496ad88
On my 78 Kz650 SR D?
Am pretty sure that neither of these would fit your 78 Kz650 SR D.
At least not as simple bolt-on replacements.
Fitment would likely entail frame alterations.
Perhaps someone having actual experience with this situation will come along to offer better or different advice.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 23 Nov 2010 11:29 by Patton.
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Engine knocking noise
23 Nov 2010 11:40
Patton wrote:
Really?? So not all 78 kz frames are the same? Damnit! I don't like the fender and giant brick tail light on my current setup. That seat and fender would look soo slick.
Omaha Rider wrote:Can I put this seat:
cgi.ebay.com/ebaymotors/OEM-Kawasaki-KZ6...&hash=item3ef5716d74
And this fender:
cgi.ebay.com/ebaymotors/KAWASAKI-KZ650-S...&hash=item53e496ad88
On my 78 Kz650 SR D?
Am pretty sure that neither of these would fit your 78 Kz650 SR D.
At least not as simple bolt-on replacements.
Fitment would likely entail frame alterations.
Perhaps someone having actual experience with this situation will come along to offer better or different advice.
Good Fortune!
Really?? So not all 78 kz frames are the same? Damnit! I don't like the fender and giant brick tail light on my current setup. That seat and fender would look soo slick.
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Engine knocking noise
23 Nov 2010 12:18 - 23 Nov 2010 12:20
Per kawasaki.com, 1978 KZ650 B, C, and D models each have a different frame. (see image below)
If needed, here's how to navigate kawasaki,com:
Click here > kzrider.com/index.php?option=com_kunena&...w&catid=13&id=376734
Good Fortune!
[Click on image to enlarge view.]
If needed, here's how to navigate kawasaki,com:
Click here > kzrider.com/index.php?option=com_kunena&...w&catid=13&id=376734
Good Fortune!
[Click on image to enlarge view.]
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 23 Nov 2010 12:20 by Patton.
Please Log in or Create an account to join the conversation.
- Omaha Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 92
- Thanks: 0
Re: Engine knocking noise
24 Nov 2010 12:42
D and B look very similar except for a few small brackets around the seat area. Hmmmm, one would think it would be cheaper to make the frames the same for all models.
1978 KZ650 SR D
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
