machine shop for head porting
- mi z1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1
- Thanks: 0
machine shop for head porting
15 Dec 2010 12:52
looking for machine shop to do port work on j head for z1 can anyone help
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: machine shop for head porting
15 Dec 2010 12:55
Cavanaugh Racing. That's where mine is.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
- kz1k
-
- Offline
- User
-

Registered
- You Cant Fix Stupid!
- Posts: 1440
- Thanks: 0
Re: machine shop for head porting
15 Dec 2010 12:58 - 15 Dec 2010 12:59
id send mine to larry too,(super nice guy), but down here in the south its easier to get it to pit stop performance.
1978 KZ1000A2
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
Last edit: 15 Dec 2010 12:59 by kz1k.
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: machine shop for head porting
15 Dec 2010 16:12
Larry Cavanaugh, Pitstop Performance, and APE are all forum sponsors and all do porting.
Please Log in or Create an account to join the conversation.
- stonemaster
-
- User
-

Public
- Thanks: 0
Re: machine shop for head porting
15 Dec 2010 16:22
Im in the south and mine went to Larry, ever heard of UPS, cost 20 bucks duh, he's #1 in anyone's book
Please Log in or Create an account to join the conversation.
- Jack
-
- Offline
- User
-

Registered
- Posts: 691
- Thanks: 7
Re: machine shop for head porting
15 Dec 2010 16:35
Just a quick heads up - using the J head on a Z1/KZ bottom involves a lot more than porting the head. There's a ton of info. on this site and
www.aperaceparts.com
about the conversion. Do a search and you'll see.
Don't want to speak for anyone but if you contact Larry I'm sure you'll get help with the overall combo and the cost of what you want.
Don't want to speak for anyone but if you contact Larry I'm sure you'll get help with the overall combo and the cost of what you want.
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
Please Log in or Create an account to join the conversation.
- muddy1
-
- Offline
- User
-

Registered
- 1980 Kz1000 LTD B4
- Posts: 136
- Thanks: 0
Re: machine shop for head porting
15 Dec 2010 16:52
Contact Larry C..... he posted a cutoff date for work/jobs, you will not be dissapointed, very nice person (really helped me out a bunch)
Dave
muddy1
Dave
muddy1
1970 SL-70
1972 CB 750
1973 Z1
1976 YZ 125
1976 KZ400
1979 KZ400 LTD
1980 KZ1000 LTD B4
1984 YZ 490
1989 750 Ninja
1972 CB 750
1973 Z1
1976 YZ 125
1976 KZ400
1979 KZ400 LTD
1980 KZ1000 LTD B4
1984 YZ 490
1989 750 Ninja
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: machine shop for head porting
20 Dec 2010 06:24
mi z1 wrote:
You need a spacer and J pistons, top idler and jig for drilling the head.
Compression loss if you use KZ pistons. Much more cost effective to use the KZ head if the motor is a 1075 or smaller.
www.flowbenchtech.com/porting/CRH/kz-data.htm
JMO
looking for machine shop to do port work on j head for z1 can anyone help
You need a spacer and J pistons, top idler and jig for drilling the head.
Compression loss if you use KZ pistons. Much more cost effective to use the KZ head if the motor is a 1075 or smaller.
www.flowbenchtech.com/porting/CRH/kz-data.htm
JMO
Please Log in or Create an account to join the conversation.
- kz1k
-
- Offline
- User
-

Registered
- You Cant Fix Stupid!
- Posts: 1440
- Thanks: 0
Re: machine shop for head porting
20 Dec 2010 07:15 - 20 Dec 2010 07:16
stonemaster wrote:
where about in the south are you? south penn?
wow 20 bucks to ship a head to larry? cost me more than that to ship my head 2 hours away. i need to use ups instead of usps.Im in the south and mine went to Larry, ever heard of UPS, cost 20 bucks duh, he's #1 in anyone's book
where about in the south are you? south penn?
1978 KZ1000A2
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
Last edit: 20 Dec 2010 07:16 by kz1k.
Please Log in or Create an account to join the conversation.
- stonemaster
-
- User
-

Public
- Thanks: 0
Re: machine shop for head porting
20 Dec 2010 12:01 - 20 Dec 2010 12:01
NC actually 24 bucks, I heard Fed Ex is even better
Last edit: 20 Dec 2010 12:01 by stonemaster.
Please Log in or Create an account to join the conversation.
- kz1k
-
- Offline
- User
-

Registered
- You Cant Fix Stupid!
- Posts: 1440
- Thanks: 0
Re: machine shop for head porting
20 Dec 2010 12:36
stonemaster wrote:
wow, usps charged me about 40 bucks to send my head to orlando, and im about 1.5 - 2 hours away. i may be sending my block to larry.NC actually 24 bucks, I heard Fed Ex is even better
1978 KZ1000A2
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: machine shop for head porting
20 Dec 2010 12:56
UPS cost me $40 from NE Indiana to Larry
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
