kz1000 shift fork shaft???

  • Frankn9
  • Frankn9's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 108
  • Thanks: 0

kz1000 shift fork shaft???

30 Dec 2010 22:02
#419444
hello, I am wondering if anyone can tell me if I can get access to the small shift fork shaft on a 78 kz1000 if I go in through the clutch side? the clip on the end of the shaft came off, the shaft slipped in towards the clutch and I can't get it to slide back out so I can put on a new clip. my books say to "tap the shaft out from the clutch side" but thats after splitting the cases. I have the oil pan off but still can't get it. I just want to know if I can get to it before I try to remove the clutch hub and such. So, does anyone know? can it be done? any help would be appriciated, Thanks
Scott

Please Log in or Create an account to join the conversation.

  • gearheadmm
  • gearheadmm's Avatar
  • Offline
  • User
  • User
    Registered
  • MUCH MORE BOOST..........I mean BRAVO
  • Posts: 290
  • Thanks: 11

Re: kz1000 shift fork shaft???

31 Dec 2010 20:00
#419545
Normally you go after these from the trans cover side, didn't say if you had it off or not. I'd want to check under there any way. Never heard of that happening.
General Joeseph Dunford FOR PRESIDENT!!!
69.46.28.106/forum/11-projects/413221-80-kz-1000-st-recycled

Please Log in or Create an account to join the conversation.

  • Frankn9
  • Frankn9's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 108
  • Thanks: 0

Re: kz1000 shift fork shaft???

01 Jan 2011 00:58
#419567
trans cover has been removed. the shaft just doesn't want to slide back out, like its catching on the groove for the clip. the bike jumps out of 3rd gear so I took it apart to check things out. everything looks good except the shift fork shaft not in place. the shaft will slide into the case and protrude from the trans cover side just no far enough to get the clip on. Thanks for getting back to me.

Please Log in or Create an account to join the conversation.

  • gearheadmm
  • gearheadmm's Avatar
  • Offline
  • User
  • User
    Registered
  • MUCH MORE BOOST..........I mean BRAVO
  • Posts: 290
  • Thanks: 11

Re: kz1000 shift fork shaft???

01 Jan 2011 18:16
#419653
Jumping out of gear can bend forks and shafts. Make sure forks move freely.
General Joeseph Dunford FOR PRESIDENT!!!
69.46.28.106/forum/11-projects/413221-80-kz-1000-st-recycled

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: kz1000 shift fork shaft???

01 Jan 2011 19:05
#419663
If you manage to get it out, put in the one that won't bend.

kzzone.com/trans.html

Please Log in or Create an account to join the conversation.

  • Hawk1
  • Hawk1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 19
  • Thanks: 0

Re: kz1000 shift fork shaft???

18 Mar 2012 20:26
#510510
I know its old posts, but I was wondering how things ended?

Is this possible or not. I think the same happens here..
Hawk1

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum