oh crap

  • 771000KZ
  • 771000KZ's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 98
  • Thanks: 0

oh crap

03 Jan 2011 14:31
#419909
So I was planning on rebuilding my engine, I pulled the head, block and pistons and I noticed that the connecting rods have allot of play in them, they rock back and forth if you grab the small end, not slide, rock. I take it that is not normal? how do I fix it?

Please Log in or Create an account to join the conversation.

  • lemo32
  • lemo32's Avatar
  • Offline
  • User
  • User
    Registered
  • The Price of Cool aint cheap
  • Posts: 316
  • Thanks: 2

Re: oh crap

03 Jan 2011 14:58
#419914
Should have some rock, side to side, you can use a feeler gauge to check big end rod clearence, should be no more than.024in, if more you will have to send crank off or get a replacement.
1979 kz 1000 06 katana 750

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: oh crap

03 Jan 2011 15:28
#419917
Normal - as said.

Pull up on the rod with one fist, then whack it downward with the other open hand. If you hear a distinct metallic click, then that rod bearing is shot.

Best of luck.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: oh crap

03 Jan 2011 17:36
#419941
not that it means a lot, but roller bottom ends are extremely durable....bike have a lot of miles?...check via the above advice and the manual.....

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum