Kz750 Adjustable Cam Sprockets?
- DoubleDub
-
Topic Author
- User
-

Public
- Thanks: 0
Kz750 Adjustable Cam Sprockets?
07 Jan 2011 11:04
Is there a source for adjustable cam sprockets for the Kz750 engines with the Hyvo chain? I haven't had any luck searching.
Would I be required to convert to the standard chain timing components/crank to get this?
Would I be required to convert to the standard chain timing components/crank to get this?
Please Log in or Create an account to join the conversation.
- cafekz750
-
- Offline
- User
-

Registered
- Posts: 333
- Thanks: 0
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 12:02
I am not aware of any company offering adjustable cam sprockets for the KZ650/750.
Lots of time and a dremel tool can be used to oval the stock sprocket holes in order to adjust the cam timing.
Perhaps someone else will chime in...
Lots of time and a dremel tool can be used to oval the stock sprocket holes in order to adjust the cam timing.
Perhaps someone else will chime in...
1981 KZ750H2 - V&H 4-1 pipe, pods, jetted, clubmans, homebrew rearsets, 18" rear wheel and more.
Parting out a 1982 KZ750H3 to fund future projects
2 other non-Kawasaki motorcycles
Parting out a 1982 KZ750H3 to fund future projects
2 other non-Kawasaki motorcycles
Please Log in or Create an account to join the conversation.
- DoubleDub
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 12:11
Thanks, that was the conclusion I had come to as well, but wondered if anyone knew of a company that made or would make them.
Anyone else?
Anyone else?
Please Log in or Create an account to join the conversation.
- kzr750r1
-
- Offline
- User
-

Registered
- Posts: 445
- Thanks: 9
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 13:11
KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST
Better to be shot out of a cannon then squeezed through a tube. - HST
Please Log in or Create an account to join the conversation.
- DoubleDub
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 15:03
Very nice - what did they run you? Or did you do them yourself?
Please Log in or Create an account to join the conversation.
- kzr750r1
-
- Offline
- User
-

Registered
- Posts: 445
- Thanks: 9
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 15:28
Don't recall the cost. Should be a simple job for a properly equipped machinist. Way cheaper than having a one off sprocket created. APE has them for the big bores cause of the drag bike market.
We had a conversation about this a while back and APEjay piped in on it if I recall. Let me see if I can find it.
Would just need the 360 turntable for the mill and I could pull this off these days in house. Could probably barrow one in a pinch.
We had a conversation about this a while back and APEjay piped in on it if I recall. Let me see if I can find it.
Would just need the 360 turntable for the mill and I could pull this off these days in house. Could probably barrow one in a pinch.
KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST
Better to be shot out of a cannon then squeezed through a tube. - HST
Please Log in or Create an account to join the conversation.
- DoubleDub
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 15:32
Cool - thanks for the info. I must have missed the previous posts. I'll do some searching.
Please Log in or Create an account to join the conversation.
- kzr750r1
-
- Offline
- User
-

Registered
- Posts: 445
- Thanks: 9
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 15:34
KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST
Better to be shot out of a cannon then squeezed through a tube. - HST
Please Log in or Create an account to join the conversation.
- Nebr_Rex
-
- Offline
- User
-

Registered
- Posts: 1889
- Thanks: 295
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 17:26
DoubleDub wrote:
How many extra bolt holes are on you cam sprockets?
Are they all in the same position?
Like the cheap crank sprockets on auto V-8s you can advance or retard your cams at about 5* or more.
Each tooth equals about 15.5 degrees.
Line up your different bolt holes with the stock settings and see where the cam tooth lines up.
Is there a source for adjustable cam sprockets for the Kz750 engines with the Hyvo chain? I haven't had any luck searching.
Would I be required to convert to the standard chain timing components/crank to get this?
How many extra bolt holes are on you cam sprockets?
Are they all in the same position?
Like the cheap crank sprockets on auto V-8s you can advance or retard your cams at about 5* or more.
Each tooth equals about 15.5 degrees.
Line up your different bolt holes with the stock settings and see where the cam tooth lines up.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
Please Log in or Create an account to join the conversation.
- DoubleDub
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Kz750 Adjustable Cam Sprockets?
07 Jan 2011 18:24
Hmm...not sure I follow. I'll take a look at the sprockets I have again. I haven't degree'd yet, just expecting to need to when I reassemble.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
