CAM SPECS?
- Nebr_Rex
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1889
- Thanks: 295
CAM SPECS?
08 Jan 2011 12:59
I have a .395 lift cam with NORRIS KT-1 engraved on it.
Does anyone know the duration of this cam?
It looks to be a shorter duration cam compaired to the GPZ1100 and .385 cams I have.
Does anyone know the duration of this cam?
It looks to be a shorter duration cam compaired to the GPZ1100 and .385 cams I have.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: CAM SPECS?
08 Jan 2011 13:10
Try their phone # at this link:http://www.manta.com/c/mmfsbgx/norris-performance-products
Don't know about now, but Norris was a big name in the 80's. Loved the Cams I ran in some Big VW motors.
Don't know about now, but Norris was a big name in the 80's. Loved the Cams I ran in some Big VW motors.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: CAM SPECS?
08 Jan 2011 15:30
Nebr_Rex wrote:
Could be a Kawasaki Turbo cam. They made a KT-1 with the following specs.
.408" lift
263 @.020 duration
It probably is pointer than the GPz cam.
They called it a turbo cam with super torque on normally aspirated motors.
Taking the duration spec at .020 into account, it's probably about like an old 8X Andrews.
I have a .395 lift cam with NORRIS KT-1 engraved on it.
Does anyone know the duration of this cam?
It looks to be a shorter duration cam compaired to the GPZ1100 and .385 cams I have.
Could be a Kawasaki Turbo cam. They made a KT-1 with the following specs.
.408" lift
263 @.020 duration
It probably is pointer than the GPz cam.
They called it a turbo cam with super torque on normally aspirated motors.
Taking the duration spec at .020 into account, it's probably about like an old 8X Andrews.
Please Log in or Create an account to join the conversation.
- Nebr_Rex
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1889
- Thanks: 295
Re: CAM SPECS?
08 Jan 2011 15:59
Thank you Motor Head and Larry for the info.
Yes the lobes are pointed compaired to the other two.
A little wear over the nose,but they all measure out about the same.(.002)
Going with a 1075 this winter in my shafty and was going to use GPZ for the intake and .385 for the exhaust.
Think I'll try this cam since I'm after all the mid range I can get.
Yes the lobes are pointed compaired to the other two.
A little wear over the nose,but they all measure out about the same.(.002)
Going with a 1075 this winter in my shafty and was going to use GPZ for the intake and .385 for the exhaust.
Think I'll try this cam since I'm after all the mid range I can get.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: CAM SPECS?
08 Jan 2011 16:02
Nebr_Rex wrote:
You're always very welcome
Thank you Motor Head and Larry for the info.
Yes the lobes are pointed compaired to the other two.
A little wear over the nose,but they all measure out about the same.(.002)
Going with a 1075 this winter in my shafty and was going to use GPZ for the intake and .385 for the exhaust.
Think I'll try this cam since I'm after all the mid range I can get.
You're always very welcome
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
