Measuring cams?
- bigdamdog1280
-
Topic Author
- Offline
- User
-

Registered
- Hollywood
- Posts: 4
- Thanks: 0
Measuring cams?
15 Jan 2011 00:48
I bought a dragbike several years ago. It was running fine so never did anything to it. It is a 1978 Z1R with Kosmen rearend with a 10" tire. Engine is a MTC 1327cc Big Block 13.5:1 piston complete. We decided to do some work on the head (think it has a bent valve) and when I pulled the cams out I was unable to tell who or what they were. Did the simple measurements on them (1.460" - 1.000" = .460") and found they had something like .460 lift(?) not sure. The only marking on them were on the top of the sprocket flat side and was stamped the numbers 7065. Was wondering if anybody out there might have a clue on who made them and what they are. Can supply pics if needed. Hope someone out there can help. Can't seem to find anything through most of the performance sites that sell cam for KZ1000s.
1977 KZ-1000 LTD ("Little Red") Wiseco 1075cc
1978 KZ-1000 Z1R Dragbike MTC 1327cc BB
1978 KZ-1000 Z1R Street Machine MTC 1197cc
1978 KZ-1000 LTD Street Bike MTC 1261cc
1977 KZ-1000 LTD RC Eng. 1102cc Turbo Street
ZX-10 Dragbike MTC 1428cc BB Turbo
1978 KZ-1000 Z1R Dragbike MTC 1327cc BB
1978 KZ-1000 Z1R Street Machine MTC 1197cc
1978 KZ-1000 LTD Street Bike MTC 1261cc
1977 KZ-1000 LTD RC Eng. 1102cc Turbo Street
ZX-10 Dragbike MTC 1428cc BB Turbo
Please Log in or Create an account to join the conversation.
- RedlineJunkie
-
- Offline
- User
-

Registered
- Posts: 129
- Thanks: 2
Re: Measuring cams?
15 Jan 2011 00:58
I can't help you with the part numbers but the most accurate way to measure a cam's lift is with a set of V-Blocks and a dial indicator. Duration is different matter as the lifter bucket shim face is much, much, larger than a dial indicator point and you will find much less duration than what the cam delivers at the valve.
I realize this wasn't much help but I gave it my best shot.
I realize this wasn't much help but I gave it my best shot.
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Measuring cams?
15 Jan 2011 07:27
The maximum lift of the cam (as it would be sold), is exactly as you have measured it.
Nothing else required.
Nothing else required.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- Jack
-
- Offline
- User
-

Registered
- Posts: 691
- Thanks: 7
Re: Measuring cams?
15 Jan 2011 08:21
You didn't mention whether the cam measured was intake or exhaust- are both cams 460 lift? Typical cam combos would be 460/430 or 480/460 ,can't say I've ever seen a 460/460 deal but it certainly could be done. Just curious...
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
Please Log in or Create an account to join the conversation.
- bigdamdog1280
-
Topic Author
- Offline
- User
-

Registered
- Hollywood
- Posts: 4
- Thanks: 0
Re: Measuring cams?
15 Jan 2011 21:37
Didn't measure both but will do. I was just wondering on the stamped number on the cams themselves. I know they weren't custom made and someone had to manufacture them. It would be a benefit if I could get all the specs on the cams. Just knowing the lift is little help when trying to get the best and optimal performance out of them. Thanks for the answers guys.
1977 KZ-1000 LTD ("Little Red") Wiseco 1075cc
1978 KZ-1000 Z1R Dragbike MTC 1327cc BB
1978 KZ-1000 Z1R Street Machine MTC 1197cc
1978 KZ-1000 LTD Street Bike MTC 1261cc
1977 KZ-1000 LTD RC Eng. 1102cc Turbo Street
ZX-10 Dragbike MTC 1428cc BB Turbo
1978 KZ-1000 Z1R Dragbike MTC 1327cc BB
1978 KZ-1000 Z1R Street Machine MTC 1197cc
1978 KZ-1000 LTD Street Bike MTC 1261cc
1977 KZ-1000 LTD RC Eng. 1102cc Turbo Street
ZX-10 Dragbike MTC 1428cc BB Turbo
Please Log in or Create an account to join the conversation.
- bigdamdog1280
-
Topic Author
- Offline
- User
-

Registered
- Hollywood
- Posts: 4
- Thanks: 0
Re: Measuring cams?
15 Jan 2011 21:51
I have these cams and a set of Andrew 3X .418" lift cams the Andrews were marked on the the end of each cam. So I can find all the specs on them.
1977 KZ-1000 LTD ("Little Red") Wiseco 1075cc
1978 KZ-1000 Z1R Dragbike MTC 1327cc BB
1978 KZ-1000 Z1R Street Machine MTC 1197cc
1978 KZ-1000 LTD Street Bike MTC 1261cc
1977 KZ-1000 LTD RC Eng. 1102cc Turbo Street
ZX-10 Dragbike MTC 1428cc BB Turbo
1978 KZ-1000 Z1R Dragbike MTC 1327cc BB
1978 KZ-1000 Z1R Street Machine MTC 1197cc
1978 KZ-1000 LTD Street Bike MTC 1261cc
1977 KZ-1000 LTD RC Eng. 1102cc Turbo Street
ZX-10 Dragbike MTC 1428cc BB Turbo
Please Log in or Create an account to join the conversation.
- turboguzzi
-
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
Re: Measuring cams?
16 Jan 2011 01:13
make a small tour of megacycle cams, webcams and andrews sites (andrews have the old specs for the kz cams though they dont do them anymore) and you might find them.
TG
you measured the lift just fine
TG
you measured the lift just fine
Please Log in or Create an account to join the conversation.
- bigdamdog1280
-
Topic Author
- Offline
- User
-

Registered
- Hollywood
- Posts: 4
- Thanks: 0
Re: Measuring cams?
13 Aug 2011 00:45
Just FYI found them on Megacycle Cams #70-65. Not 460 lift but 438 lift. Thanks for the help.
1977 KZ-1000 LTD ("Little Red") Wiseco 1075cc
1978 KZ-1000 Z1R Dragbike MTC 1327cc BB
1978 KZ-1000 Z1R Street Machine MTC 1197cc
1978 KZ-1000 LTD Street Bike MTC 1261cc
1977 KZ-1000 LTD RC Eng. 1102cc Turbo Street
ZX-10 Dragbike MTC 1428cc BB Turbo
1978 KZ-1000 Z1R Dragbike MTC 1327cc BB
1978 KZ-1000 Z1R Street Machine MTC 1197cc
1978 KZ-1000 LTD Street Bike MTC 1261cc
1977 KZ-1000 LTD RC Eng. 1102cc Turbo Street
ZX-10 Dragbike MTC 1428cc BB Turbo
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Measuring cams?
13 Aug 2011 09:10 - 13 Aug 2011 09:18
Maybe these will help....
Measuring Cams:
Cam Motion Cams:
Mega Cycle Cams:
Andrews Cams:
WebCam Cams:
Measuring Cams:
Cam Motion Cams:
Attachment CamMotionCamsJPG.JPG not found
Mega Cycle Cams:
Attachment MegaCycleCams.JPG not found
Andrews Cams:
Attachment AndrewCamDataSheetSpecs.JPG not found
WebCam Cams:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 13 Aug 2011 09:18 by Old Man Rock.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
