exhaust gasket question

  • calvin17d
  • calvin17d's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 187
  • Thanks: 2

exhaust gasket question

17 Jan 2011 10:37
#422966
just ordered a new V&H 4 into 1. I am pretty excited about this addition to my restoration project. I had an old beat up 4 into 1 kerker that leaked carbon all over the front of the engine which made its way through the cooling fins. I read on Z1e that some of the aftermarket exhausts are better suited to use the suzuki gaskets which are 2mm thicker than the traditional copper gaskets.

Any thoughts?
1976 Kz900 A4

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: exhaust gasket question

17 Jan 2011 11:35
#422982
Before installing new exhaust system and gaskets, make sure the old ones are removed as riders have not looked and wonder why things don't fit.

I use a machinist's scribe with a 90 degree hook to check the exhaust ports when replacing the gaskets.

I believe the thicker Suzuki gaskets will work for you, just remember not to over tighten the exhaust clamp nuts.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • hocbj23
  • hocbj23's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: exhaust gasket question

17 Jan 2011 11:42
#422983
MFolks wrote:
Before installing new exhaust system and gaskets, make sure the old ones are removed as riders have not looked and wonder why things don't fit.

I use a machinist's scribe with a 90 degree hook to check the exhaust ports when replacing the gaskets.

I believe the thicker Suzuki gaskets will work for you, just remember not to over tighten the exhaust clamp nuts.
Old dental pick works well for gasket removal as well.bj

Please Log in or Create an account to join the conversation.

  • calvin17d
  • calvin17d's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 187
  • Thanks: 2

Re: exhaust gasket question

17 Jan 2011 13:04
#423001
old gaskets are not an issue here. I had my head off and completely cleaned to include the exhaust ports.

My concern here is whether it is recommended to use the thicker gaskets or not. I have the new copper gaskets that came with my gasket kit but I dont want to be scrubbing carbon again after new exhaust install.

I think I was hoping to hear if anyone had problems using the copper gaskets with V&H's, thanks.
1976 Kz900 A4

Please Log in or Create an account to join the conversation.

  • andy9802gt
  • andy9802gt's Avatar
  • Offline
  • User
  • User
    Registered
  • If it tastes that good, eat it yourself.
  • Posts: 695
  • Thanks: 19

Re: exhaust gasket question

17 Jan 2011 13:13
#423003
The thicker gaskets are fine as long as they have the same I.D. and O.D. as the stock ones.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm

Please Log in or Create an account to join the conversation.

  • stonemaster
  • stonemaster's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: exhaust gasket question

17 Jan 2011 13:16 - 17 Jan 2011 13:19
#423006
I used the Zuk gaskets but the ones from Redline are better, cost more but they are better

double check ur V&H for alignment, they're having trouble again
Last edit: 17 Jan 2011 13:19 by stonemaster.

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: exhaust gasket question

17 Jan 2011 13:23
#423008
MFolks wrote:
Before installing new exhaust system and gaskets, make sure the old ones are removed as riders have not looked and wonder why things don't fit.

I use a machinist's scribe with a 90 degree hook to check the exhaust ports when replacing the gaskets.

I believe the thicker Suzuki gaskets will work for you, just remember not to over tighten the exhaust clamp nuts.

X2

let us know and take some pics of the amount of threads sticking out of the ex nuts when it is mounted...also do a picture write up on the pipe from shipping box to work bench to bike...

A bunch of folks on here have questions about the latest quality and fit of V&H pipes and this would be a great service to KZR seeing as you are the latest one to order brand new from them...i would really like a pictures from doorstep to bike....and the ex gasket fit would be cool too...

please if you could..

a review will help folks here deciding if they can buy V&H
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • andy9802gt
  • andy9802gt's Avatar
  • Offline
  • User
  • User
    Registered
  • If it tastes that good, eat it yourself.
  • Posts: 695
  • Thanks: 19

Re: exhaust gasket question

17 Jan 2011 13:24
#423009
stonemaster wrote:
I used the Zuk gaskets but the ones from Redline are better, cost more but they are better

double check ur V&H for alignment, they're having trouble again

I have the ones from Redline also. Very nice pieces indeed.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm

Please Log in or Create an account to join the conversation.

  • calvin17d
  • calvin17d's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 187
  • Thanks: 2

Re: exhaust gasket question

17 Jan 2011 13:27
#423010
I will take a look over at redline, thanks.

I will gladly put up some pictures however it may not be for a couple weeks as my order is still a week out, and my engine is waiting to be assembled....
1976 Kz900 A4

Please Log in or Create an account to join the conversation.

  • stonemaster
  • stonemaster's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: exhaust gasket question

17 Jan 2011 13:28
#423012
trianglelaguna wrote:
MFolks wrote:
Before installing new exhaust system and gaskets, make sure the old ones are removed as riders have not looked and wonder why things don't fit.

I use a machinist's scribe with a 90 degree hook to check the exhaust ports when replacing the gaskets.

I believe the thicker Suzuki gaskets will work for you, just remember not to over tighten the exhaust clamp nuts.

X2

let us know and take some pics of the amount of threads sticking out of the ex nuts when it is mounted...also do a picture write up on the pipe from shipping box to work bench to bike...

A bunch of folks on here have questions about the latest quality and fit of V&H pipes and this would be a great service to KZR seeing as you are the latest one to order brand new from them...i would really like a pictures from doorstep to bike....and the ex gasket fit would be cool too...

please if you could..

a review will help folks here deciding if they can buy V&H

mine are fairly new and not on the bike yet, I did check mine for alignment on the head once I got it back, with a straight edge I had about a 1/8 off on a couple, but witnin reason, one of the guys at Z1 told me about one they got that was almost an inch off, DAMN

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: exhaust gasket question

17 Jan 2011 13:36
#423016
sure an 1/8 side ways ok....but my new old parts score pipe was too tall on some ports..imagine trying to bend the bend to pop in...was'nt going to easy...in fact it sucked ass...



i would dig a review of box to bike..scratches..fit...finish...alignment ...everything...
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • stonemaster
  • stonemaster's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: exhaust gasket question

17 Jan 2011 13:58
#423023
yea 1/8 aint too bad, I had a 3/8 on a MAC i bent and ur right it sucked ass
as far as finish the VH is nice, no scratches, great finish
my guess is in the QC inspection dept someone aint doin their job, ALL manufacturers make mistakes, but a good QC dept catches those and sends them to the seconds bin, this apparently is not the case at V&H these days

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum