broken dowel pin
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
broken dowel pin
17 Jan 2011 14:18
on the end of the crankshaft, fits into the slot on the advance unit, anyone know any tricks to getting out ???/ case hardened so drilling isnt an option, I dont think, not enough to grab to, trying a fairly strong magnet now but ???? I'm looking for ideas
there should be laws allowing for unpunished execution of PO's
there should be laws allowing for unpunished execution of PO's
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: broken dowel pin
17 Jan 2011 14:30
I think you're talking about a woodruff key. If so just take a punch, lay it down parallel to the crank on the end of the "key", and start tapping it. It's round on the bottom and should rotate out of the groove it's in.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: broken dowel pin
17 Jan 2011 14:41 - 17 Jan 2011 14:43
nope, its a dowel pin it fits in a slot on the back side of the advance unit,
its number 11 the photo dont show the hole it fits into but its there, aligns advance unit to crank
www.bikebandit.com/houseofmotorcycles/19...1/o/m17211#sch550108
its number 11 the photo dont show the hole it fits into but its there, aligns advance unit to crank
www.bikebandit.com/houseofmotorcycles/19...1/o/m17211#sch550108
Last edit: 17 Jan 2011 14:43 by stonemaster.
Please Log in or Create an account to join the conversation.
- z1kzonly
-
- Offline
- User
-

Registered
- Sustaining Member
- Posts: 2815
- Thanks: 527
Re: broken dowel pin
17 Jan 2011 14:59
put a dab of weld from a mig welder on it.
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.
- cyclhed
-
- Offline
- User
-

Registered
- Posts: 56
- Thanks: 0
Re: broken dowel pin
17 Jan 2011 15:03
Mine was the same way when I removed it to lube the advancer, but the one in my 82 kz1000m2 was a roll pin. I screwed a small sheet metal screw into the hole and pulled it out. It doesn't hold anything, just locates the advancer so if you can position the advance and torque the bolt it will stay there. If you can't work it loose and pull it you will have to drill it.
Past:
1972 175 F7
1974 KZ400
1981 GPZ550
1980 KZ750 LTD
1978 KZ1000
1968 H1500 Mach III
Present:
1982 KZ1000 M2 CSR
1972 175 F7
1974 KZ400
1981 GPZ550
1980 KZ750 LTD
1978 KZ1000
1968 H1500 Mach III
Present:
1982 KZ1000 M2 CSR
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: broken dowel pin
17 Jan 2011 15:31
cyclhed wrote:
Mine was the same way when I removed it to lube the advancer, but the one in my 82 kz1000m2 was a roll pin. I screwed a small sheet metal screw into the hole and pulled it out. It doesn't hold anything, just locates the advancer so if you can position the advance and torque the bolt it will stay there. If you can't work it loose and pull it you will have to drill it.[/quote
thats what I thought, my jap indie friend said other wise, I guess anyone can be wrong, its just there for alignment
I will try to get it out but i aint worrying to much
thanx man
Please Log in or Create an account to join the conversation.
- stonemaster
-
Topic Author
- User
-

Public
- Thanks: 0
Re: broken dowel pin
17 Jan 2011 17:12
well I guess I'm gonna just go with it, I can line it up, there is just enough sticking up that I can just feel it, my big ass magnet didnt work and I can always double check to see if its TDC through the plug hole
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
