The "J" question
- turboguzzi
-
Topic Author
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
The "J" question
25 Jan 2011 07:14
not what you'd think 
the split rods of my 750 have the usual "J" marks on the side.
i obviously kept the caps paired with the rods but what i forgot to write down is if the "j" mark has to face fwd, backward, or if it doesnt matter?
BTW, the rods are not exactly symmetrical. Near the foot of the rod there is little spike on just one side.
Unless i missed it, manual doesnt mention anything about rod orientation.
want to torque down the rods tonight... any ideas?
TG
the split rods of my 750 have the usual "J" marks on the side.
i obviously kept the caps paired with the rods but what i forgot to write down is if the "j" mark has to face fwd, backward, or if it doesnt matter?
BTW, the rods are not exactly symmetrical. Near the foot of the rod there is little spike on just one side.
Unless i missed it, manual doesnt mention anything about rod orientation.
want to torque down the rods tonight... any ideas?
TG
Please Log in or Create an account to join the conversation.
- turboguzzi
-
Topic Author
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
Re: The "J" question
26 Jan 2011 03:21
guess most people are used to roller cranks, but still,
if it wasnt for that little assymetrical bump, wouldnt be asking
so bump fwd or J fwd?
tnxs in advance
if it wasnt for that little assymetrical bump, wouldnt be asking
so bump fwd or J fwd?
tnxs in advance
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: The "J" question
26 Jan 2011 03:43
You should have two marks on the rods the letter mark is a "Weight " mark and a paint mark which indicates "ID" You than have to match the bearing size to the crank and the rod. The "nub" faces forward. That is a "Knocker" if the bearing starts to ware out it should hit the case lightly.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- turboguzzi
-
Topic Author
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
Re: The "J" question
26 Jan 2011 04:19
nice, learn something new everyday, didnt know about this "wear indicator"
sure, bearing size matching, colors, etc. - done,
was really puzzled just by that "nub"....
tnxs
TG
sure, bearing size matching, colors, etc. - done,
was really puzzled just by that "nub"....
tnxs
TG
Please Log in or Create an account to join the conversation.
- turboguzzi
-
Topic Author
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
Re: The "J" question
26 Jan 2011 06:11
combed a few other workshop manuals from other brands and found that the: "bearing shell locating tabs forward / weight letter mark backwards" is indeed common to most inline fours.
just funny that the KZ650/750 manuals dont even mention rod orientation..
just funny that the KZ650/750 manuals dont even mention rod orientation..
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: The "J" question
26 Jan 2011 18:23
In reality it would make no difference.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
