1000cc 4cyl, primary diameter.

  • notaduc
  • notaduc's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

1000cc 4cyl, primary diameter.

29 Jan 2011 16:04
#426835
I am looking for outside diameter measurements of exhaust header primarys. Both stock and aftermarket.

Thanks!
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: 1000cc 4cyl, primary diameter.

29 Jan 2011 16:06
#426837
pm OMR.....hes working on some......B)

Please Log in or Create an account to join the conversation.

  • notaduc
  • notaduc's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

Re: 1000cc 4cyl, primary diameter.

30 Jan 2011 06:11
#427038
If anyone with a set of headers could take a quick measurement, would be great.
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: 1000cc 4cyl, primary diameter.

30 Jan 2011 06:30
#427042
1.5" O.D. is the norm on the majority of after market 4-1 header designs in the risers (head to collector)....

There's a reason for this in exhaust designs... Tunable (steering) of the desired power band... Pipe wall thickness also plays into the equations. Then there's the length of the risers/exhaust end, collector and baffle designs as well for performance gains.

Now before everyone jumps my case here, displacements, cam/P&P head/valve, carbs is where the true power gains are made.

Basically there's a whole slew of variables required in the design that come into the mix...

Can't say for stock for I don't have a stock exhaust to measure from. I would think 1.25" to 1.5" is ~ right.

OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • notaduc
  • notaduc's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

Re: 1000cc 4cyl, primary diameter.

30 Jan 2011 06:59
#427047
Thanks OMR.

I work for an exhaust manufacturer (cars), trying to see it we have the tooling for the bender, I had figured appx 1.5" would be the max. The smallest we have tooling for is 1.625.

:(
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: 1000cc 4cyl, primary diameter.

30 Jan 2011 07:06
#427048
1.625" may be ok.... at least to fit into the head port.
The riser to head tubing is normally slightly flanged to seal on the port exhaust gaskets.

Get a cut piece a couple inches long and size to port...

Just to give you some insight...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum