wiseco boring clearance

  • turboguzzi
  • turboguzzi's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 852
  • Thanks: 75

wiseco boring clearance

02 Feb 2011 04:37
#427784
time to take the cylinder block to boring :)

trouble is that i dont have the spec sheet for my 810 kit.

Can anybody tell what's the recommended tolerance for these forged 810/69mm kits?

Thanks in advance

TG

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: wiseco boring clearance

02 Feb 2011 06:02
#427791
KD9JUR

Please Log in or Create an account to join the conversation.

  • turboguzzi
  • turboguzzi's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 852
  • Thanks: 75

Re: wiseco boring clearance

02 Feb 2011 09:35
#427832
Thanks Steell, that's what i found before posting too.... :)

the first one is two stroke related,

Then went through those links too, not much info either.

Only the FAQ has got a very generic 0.004 for "small blocks", (guess they are talking about chevy's....)

So not very specific info and quite a large clearance compared to the 0.002 i usually go for in cast pistons. my tuner friend recommended 0.003 to allow for the forged blanks.

How does that sound? Anybody installed an 810 kit lately or other wiseco slugs?



"The factors that affect this are cylinder wall thickness, whether the block is filled, the overall compression height of the piston, piston material and thickness, and whether a marine engine is to see fresh-water cooling. Most small blocks get .004 piston to wall clearance and most big blocks get .005 due to the use of our 2618 high-strength alloy."

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: wiseco boring clearance

02 Feb 2011 10:23
#427843
Give 'em a call. :)

1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: wiseco boring clearance

02 Feb 2011 13:07
#427887
.0015 / .0020"

Be sure the shop knows how to put the correct finish on the hone. Hope it is not an automotive shop.

Please Log in or Create an account to join the conversation.

  • turboguzzi
  • turboguzzi's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 852
  • Thanks: 75

Re: wiseco boring clearance

02 Feb 2011 15:22
#427928
thanks jay

that's pretty much what i use for cast pistons too, so you say not care too much about these being forgings (or are they? :) )

Cheers

TG

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: wiseco boring clearance

02 Feb 2011 23:22
#428048
Yes. It is a high silicon forging, so it can run that tight with no problem.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum