Clutch Carnage

  • dejavoodo41
  • dejavoodo41's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 405
  • Thanks: 14

Clutch Carnage

14 Feb 2011 11:46 - 14 Feb 2011 12:00
#430627
Why does it always seem that every time I fix something something else breaks. This morning I simultaneously discovered that the reserve function on my new petcock does not work and suffered catastrophic clutch failure. Oh well the worse part was the push to the gas station so I could limp it home...lol

1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle

New Smyrna Beach, FL
Last edit: 14 Feb 2011 12:00 by dejavoodo41.

Please Log in or Create an account to join the conversation.

  • dejavoodo41
  • dejavoodo41's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 405
  • Thanks: 14

Re: Clutch Carnage

14 Feb 2011 11:49 - 14 Feb 2011 11:50
#430630
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle

New Smyrna Beach, FL
Last edit: 14 Feb 2011 11:50 by dejavoodo41.

Please Log in or Create an account to join the conversation.

  • dejavoodo41
  • dejavoodo41's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 405
  • Thanks: 14

Re: Clutch Carnage

14 Feb 2011 11:58
#430633
One More
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle

New Smyrna Beach, FL

Please Log in or Create an account to join the conversation.

  • dejavoodo41
  • dejavoodo41's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 405
  • Thanks: 14

Re: Clutch Carnage

14 Feb 2011 11:58 - 14 Feb 2011 13:19
#430634
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle

New Smyrna Beach, FL
Last edit: 14 Feb 2011 13:19 by dejavoodo41.

Please Log in or Create an account to join the conversation.

  • dejavoodo41
  • dejavoodo41's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 405
  • Thanks: 14

Re: Clutch Carnage

14 Feb 2011 12:02 - 14 Feb 2011 13:35
#430635
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle

New Smyrna Beach, FL
Last edit: 14 Feb 2011 13:35 by dejavoodo41.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Clutch Carnage

14 Feb 2011 12:56
#430638
That's a bummer. I'm about to tear into my clutch because it's been slipping. Hope I don't find anything like that! :(

Please Log in or Create an account to join the conversation.

  • dejavoodo41
  • dejavoodo41's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 405
  • Thanks: 14

Re: Clutch Carnage

14 Feb 2011 13:05
#430640
Weird thing was that it was working fine. It gave no indication that anything was wrong until I went to pull the clutch in when I ran out of gas and it pulled hard. I was just cruising enjoying the sun and I got a double whammy....lol
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle

New Smyrna Beach, FL

Please Log in or Create an account to join the conversation.

  • TomW
  • TomW's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep the blue side up.
  • Posts: 502
  • Thanks: 52

Re: Clutch Carnage

15 Feb 2011 10:57
#430859
dejavoodo41 wrote:
Weird thing was that it was working fine. It gave no indication that anything was wrong until I went to pull the clutch in when I ran out of gas and it pulled hard. I was just cruising enjoying the sun and I got a double whammy....lol

I found two broken discs like that when I pulled my motor apart for inspection. The two inner discs were broken. The first was in four pieces, the second in one piece with two ends. There was very little wear on the friction surfaces.The clutch worked fine, no slippage or grab. All the pieces had at least one lug on it so it stayed together. The rest of the clutch assembly was fine.
'78 KZ1000B2 LTD stock + Vetter Fairing & luggage
'91 ZG1200B5 Voyager XII, stock

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Clutch Carnage

15 Feb 2011 11:39
#430866
The upside is that a bike clutch is way easier and cheaper to fix than a car...... the clutch on my old Dodge broke one day and only had about 20k miles. Sometimes thay just break.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • dejavoodo41
  • dejavoodo41's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 405
  • Thanks: 14

Re: Clutch Carnage

15 Feb 2011 12:56
#430881
Well I've checked everything out and it looks like the basket is in good shape and within spec for wear but the friction plates are trashed. Even some of them that weren't broken have pieces of material missing. Some of the steels are warped so I'm just going to replace them as well. I'm going to have to find another pressure plate since the one that came off of it has cracks forming and the center hole is elongated. Am I correct in assuming that any pressure plate from an engine up to '80 will work or is there differences from year to year? The Engine is out of an '80 so I just want to make sure that I get the right parts so I don't have to do this again for a while.
1977 KZ1000A With 1980 KZ1000A MKII engine, Wiseco 1105 kit, Dyna S Ignition, 3 Ohm Dyna Coils, Cams, Mikuni RS34 Carbs, Vance and Hines Pro Pipe with Comp Baffle

New Smyrna Beach, FL

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Clutch Carnage

15 Feb 2011 13:03
#430882
Check the part out at Z1Enterprises as it will list in the description what bikes the clutch plates work with and how many were required for that bike. For example, I have a Kz750 engine which uses the same clutch plates (fiber and steel) as my 900, but has one fewer plate of each type. Also, the springs are the same, according to Z1E.

Please Log in or Create an account to join the conversation.

  • Gabe42
  • Gabe42's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 11
  • Thanks: 0

Re: Clutch Carnage

15 Feb 2011 14:21
#430890
All you need is new clutch plates. Be glad that the steels didn't break. The clutch plates are easy to come by, but the steels are hard to find.B)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum