Installing V&H exhaust
- cincykz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Installing V&H exhaust
20 Feb 2011 06:11
Hey everyone, I just ordered a V&H 4 into 1 for my 79 KZ650B3. Currently there is an old Kerker on the bike, but one of the headers is bent in, and there's a hole or ten rusted through it. I put the order through Z1, along with pretty much everything else I need to finish the bike this week. Looking around on forums I've seen things about exhaust gaskets. I had just assumed that the pipe would come with the necessary gaskets, was I correct or will I be needing to order more?
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Installing V&H exhaust
20 Feb 2011 06:15 - 20 Feb 2011 06:28
yep you need 4 gaskets.
if their 650 headers fit anything like their 900/1000 headers just remember patience is a virtue! :laugh:
if their 650 headers fit anything like their 900/1000 headers just remember patience is a virtue! :laugh:
Still recovering,some days are better than others.
Last edit: 20 Feb 2011 06:28 by PLUMMEN.
Please Log in or Create an account to join the conversation.
- cincykz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: Installing V&H exhaust
21 Feb 2011 07:26
Thanks for the quick reply PLUMMEN. Do'h, nothing like making your big 'finish the bike' order and leaving out two bucks worth of gaskets...:huh:
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Installing V&H exhaust
21 Feb 2011 08:28
ive done worse things!
nothing like being in the middle of trying to turn somebodys plumbing back on late sunday night and find youre missing 1 fitting! :woohoo: :woohoo:
nothing like being in the middle of trying to turn somebodys plumbing back on late sunday night and find youre missing 1 fitting! :woohoo: :woohoo:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: Installing V&H exhaust
21 Feb 2011 08:30
order 8 (two sets) that way they are on hand next time you remove the pipe to do service stuff....
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- cincykz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: Installing V&H exhaust
21 Feb 2011 10:56
Well, I made a call to Z1 and their service was excellent as usual. My previous order won't ship until tomorrow, so they're going to throw eight gaskets in with it, and I'm saving the extra ten bucks on shipping
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: Installing V&H exhaust
21 Feb 2011 11:12
your 650 will be killer with that pipe..super cool looking!!!! and way fun to blip the throttle on....you are gonna be digging it
Z1 ent is always cool to deal with and great about adjusting orders...X2
now we will need some before and after pictures for sure
also V&H has been taking a beating of late,some deserved,some just hearsay ,it would be of GREAT value to this site and to owners of the 650 and other like models if you could give a review on their pipe...how did it arrive?how was it for finish out of the box? how easy was it to get to fit?how tight was the fit and final look? how are the welds? everything...
They were a great pipe for years and then had some problems , i bet some folks would like to know what the current pipes are like...pictures and review ..pleaseeeeeeeeeee....oh and see if it shows in the paperwork when the pipe was produced...
thanks
Z1 ent is always cool to deal with and great about adjusting orders...X2
now we will need some before and after pictures for sure
also V&H has been taking a beating of late,some deserved,some just hearsay ,it would be of GREAT value to this site and to owners of the 650 and other like models if you could give a review on their pipe...how did it arrive?how was it for finish out of the box? how easy was it to get to fit?how tight was the fit and final look? how are the welds? everything...
They were a great pipe for years and then had some problems , i bet some folks would like to know what the current pipes are like...pictures and review ..pleaseeeeeeeeeee....oh and see if it shows in the paperwork when the pipe was produced...
thanks
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- austin3119
-
- Offline
- User
-

Registered
- Posts: 487
- Thanks: 7
Re: Installing V&H exhaust
21 Feb 2011 21:08
PLUMMEN wrote:
LMAO. Yeah, sucked sanding down the finish between the header and the can to get that thing to fit together on my 900.
Grab a beer or 6 and you should be good to go.
yep you need 4 gaskets.
if their 650 headers fit anything like their 900/1000 headers just remember patience is a virtue! :laugh:
LMAO. Yeah, sucked sanding down the finish between the header and the can to get that thing to fit together on my 900.
Grab a beer or 6 and you should be good to go.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Installing V&H exhaust
22 Feb 2011 02:07
austin3119 wrote:
last one i installed needed flanges filed down to get exhuast collars to slide over also,it was not a fun thing to do on a brand new chrome header! :SPLUMMEN wrote:yep you need 4 gaskets.
if their 650 headers fit anything like their 900/1000 headers just remember patience is a virtue! :laugh:
LMAO. Yeah, sucked sanding down the finish between the header and the can to get that thing to fit together on my 900.
Grab a beer or 6 and you should be good to go.
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Installing V&H exhaust
22 Feb 2011 04:48 - 22 Feb 2011 05:15
austin3119 wrote:
Muffler shop expander tool takes about 5 seconds and often done for minimal charge or free with no visible change (no cracks in chrome) and resulting in perfectly snug but manageable fit.
When I had this done on a brand new V&K 4>1, the muffler guy just smiled and said, "I'd marry that!"
Imo, sanding, grinding and filing is ill-advised in this situation, and very un-Austin-like. :pinch: :lol:
Good Fortune!
...Yeah, sucked sanding down the finish between the header and the can to get that thing to fit together on my 900.
Grab a beer or 6 and you should be good to go.
Muffler shop expander tool takes about 5 seconds and often done for minimal charge or free with no visible change (no cracks in chrome) and resulting in perfectly snug but manageable fit.
When I had this done on a brand new V&K 4>1, the muffler guy just smiled and said, "I'd marry that!"
Imo, sanding, grinding and filing is ill-advised in this situation, and very un-Austin-like. :pinch: :lol:
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 22 Feb 2011 05:15 by Patton.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Last edit: 22 Feb 2011 05:24 by Patton.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Installing V&H exhaust
22 Feb 2011 09:37
Patton wrote:
if the collars dont fit,you must uh file it!(jonny cochran) :woohoo:austin3119 wrote:...Yeah, sucked sanding down the finish between the header and the can to get that thing to fit together on my 900.
Grab a beer or 6 and you should be good to go.
Muffler shop expander tool takes about 5 seconds and often done for minimal charge or free with no visible change (no cracks in chrome) and resulting in perfectly snug but manageable fit.
When I had this done on a brand new V&K 4>1, the muffler guy just smiled and said, "I'd marry that!"
Imo, sanding, grinding and filing is ill-advised in this situation, and very un-Austin-like. :pinch: :lol:
Good Fortune!
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
