Problem with used Vance and Hines header
- 29 palms
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
Problem with used Vance and Hines header
23 Feb 2011 21:47
I put my header on today but had a problem. The Vance and Hines header came with the bike it is used but in good shape. I'm not sure if it it is missing the rest of the pieces to seal the header to the block. The stock "shims" (that were used to hold the stock manifold) are too short to put any pressure on the header against the block. Anybody know if and where I can get the parts I need to get the header to seal.
The stock shims are in my hand in the picture.
The stock shims are in my hand in the picture.
1981 KZ650 cafe racer build
www.dotheton.com/forum/index.php?topic=21888.0
www.dotheton.com/forum/index.php?topic=21888.0
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: Problem with used Vance and Hines header
24 Feb 2011 01:47
29 palms wrote:
Those aren't stock, my stock ones are about twice that long.
I put my header on today but had a problem. The Vance and Hines header came with the bike it is used but in good shape. I'm not sure if it it is missing the rest of the pieces to seal the header to the block. The stock "shims" (that were used to hold the stock manifold) are too short to put any pressure on the header against the block. Anybody know if and where I can get the parts I need to get the header to seal.
The stock shims are in my hand in the picture.
Those aren't stock, my stock ones are about twice that long.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
- Bluemeanie
-
- Offline
- User
-

Registered
- Posts: 2516
- Thanks: 15
Re: Problem with used Vance and Hines header
24 Feb 2011 05:48
No eBay APP ID and/or Cert ID defined in Kunena configurationYou need the longer ones such as these...
1980 KZ650F1, Bought new out the door for $2,162.98!
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Problem with used Vance and Hines header
24 Feb 2011 07:24
andy9802gt wrote:
+ 1 , Deffinately not stock. Sorry bud.
Good luck.
29 palms wrote:I put my header on today but had a problem. The Vance and Hines header came with the bike it is used but in good shape. I'm not sure if it it is missing the rest of the pieces to seal the header to the block. The stock "shims" (that were used to hold the stock manifold) are too short to put any pressure on the header against the block. Anybody know if and where I can get the parts I need to get the header to seal.
The stock shims are in my hand in the picture.
Those aren't stock, my stock ones are about twice that long.
+ 1 , Deffinately not stock. Sorry bud.
Good luck.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Problem with used Vance and Hines header
24 Feb 2011 07:32
they come in differant lengths
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: Problem with used Vance and Hines header
24 Feb 2011 08:32
measure how tall they are..and call Z1-enterprises .com
tell them how long the ones you have are and see if they can measure theirs,and maybe sell you the right set...they are a good deal and have em in stock usually
tell them how long the ones you have are and see if they can measure theirs,and maybe sell you the right set...they are a good deal and have em in stock usually
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- 29 palms
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
Re: Problem with used Vance and Hines header
02 Mar 2011 16:07
Thanks for the ebay link I ended up purchasing them. Wasn't sure if I needed longer flanges at first or some kind of adapter, now I know.
1981 KZ650 cafe racer build
www.dotheton.com/forum/index.php?topic=21888.0
www.dotheton.com/forum/index.php?topic=21888.0
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Problem with used Vance and Hines header
02 Mar 2011 16:14
The split collars come in many lengths, so it kinda depends on who made the exhaust system and if they supplied the correct parts.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- kawman14733
-
- Offline
- User
-

Registered
- Posts: 39
- Thanks: 0
Re: Problem with used Vance and Hines header
03 Mar 2011 03:50
thos in pic are from j /gpz head
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
