cloudy oil inspection window
- hypnohio
-
Topic Author
- Offline
- User
-

Registered
- Posts: 124
- Thanks: 1
cloudy oil inspection window
28 Feb 2011 04:57
Any thoughts on why the oil inspection window on my '82 kz440 suddenly became cloudy? It seems to be clearing up, but I don't know why it happened or whether it's something ominous. thanks.
1982 KZ440 LTD
2003 EN500 C
2006 Virago 250
2003 EN500 C
2006 Virago 250
Please Log in or Create an account to join the conversation.
- 9am53
-
- Offline
- User
-

Registered
- homebrew, and some bbq
- Posts: 1787
- Thanks: 3
Re: cloudy oil inspection window
28 Feb 2011 05:31
likely means you got some water in your oil. Change your oil, and when it's colder out make sure you go for long rides that let the oil get hot and evaporate the water out. Short rides in the cold = bad.
'84 GPz900r
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
Please Log in or Create an account to join the conversation.
- Jeff.Saunders
-
- Offline
- Vendor
-

Vendors
- Posts: 1238
- Thanks: 149
Re: cloudy oil inspection window
28 Feb 2011 06:19
Far too many short rides. You need to put about 25-30 miles on a bike to get the engine oil to full temperature and burn off any condensation inside the engine. While some short trips are inevitable, try to push the bike longer and harder frequently - otherwise you are allowing the condensation to damage the internals with rust....
Please Log in or Create an account to join the conversation.
- hypnohio
-
Topic Author
- Offline
- User
-

Registered
- Posts: 124
- Thanks: 1
Re: cloudy oil inspection window
28 Feb 2011 08:57
thanks, all.
1982 KZ440 LTD
2003 EN500 C
2006 Virago 250
2003 EN500 C
2006 Virago 250
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: cloudy oil inspection window
28 Feb 2011 11:30
You also need to change the oil more frequently:the condensation mixes with hydrogen byproducts to form acid which attacks metal parts. Modern oil has acid neutralizers but they get used up quick if you get water condensation a lot. This is also why "severe service" oil change intervals are sprcified at 3 months/3000 miles whichever comes first if you do a lot of short trips. It used to be called "taxi service" intervals. Oil is cheap, whenever it looks funny, dump it.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- Jeff.Saunders
-
- Offline
- Vendor
-

Vendors
- Posts: 1238
- Thanks: 149
Re: cloudy oil inspection window
28 Feb 2011 11:44
bountyhunter wrote:
TOTALLY agree... on my turbo bike, I change oil AND filter every 500 miles... on my stock Z1A, every 1,000 miles...
I also run my fingers through the oil to see if I can feel anything in it. If I do find something I don't like, I chop open the oil filter to see what I can find. I had a broken cam chain guide on one bike I bought. The cam chain was chewing into the cylinder block and I found some very fine aluminum filings in the oil - and even more in the filter.
You also need to change the oil more frequently:the condensation mixes with hydrogen byproducts to form acid which attacks metal parts. Modern oil has acid neutralizers but they get used up quick if you get water condensation a lot. This is also why "severe service" oil change intervals are sprcified at 3 months/3000 miles whichever comes first if you do a lot of short trips. It used to be called "taxi service" intervals. Oil is cheap, whenever it looks funny, dump it.
TOTALLY agree... on my turbo bike, I change oil AND filter every 500 miles... on my stock Z1A, every 1,000 miles...
I also run my fingers through the oil to see if I can feel anything in it. If I do find something I don't like, I chop open the oil filter to see what I can find. I had a broken cam chain guide on one bike I bought. The cam chain was chewing into the cylinder block and I found some very fine aluminum filings in the oil - and even more in the filter.
Please Log in or Create an account to join the conversation.
- mtbspeedfreak
-
- Offline
- User
-

Registered
- Posts: 1413
- Thanks: 36
Re: cloudy oil inspection window
05 Mar 2011 13:33
Jeff.Saunders wrote:
What brand and weight oil do you run? I've never dissected my oil filter before, seems like cheap insurance, I'm about due for an oil change. Thanks for the tip!
TOTALLY agree... on my turbo bike, I change oil AND filter every 500 miles... on my stock Z1A, every 1,000 miles...
I also run my fingers through the oil to see if I can feel anything in it. If I do find something I don't like, I chop open the oil filter to see what I can find. I had a broken cam chain guide on one bike I bought. The cam chain was chewing into the cylinder block and I found some very fine aluminum filings in the oil - and even more in the filter.
What brand and weight oil do you run? I've never dissected my oil filter before, seems like cheap insurance, I'm about due for an oil change. Thanks for the tip!
2000 ZRX 1100
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
