Clutch cable sticking

  • KillDevil7733
  • KillDevil7733's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 9
  • Thanks: 0

Clutch cable sticking

03 Mar 2011 07:29
#434594
Okay so the problem seems to be that my clutch cable is sticking. At the beginning of the day, it was tough to squeeze, but it worked. At the end of the day, it was so stiff that I couldn't squeeze the handle at all. On the cable there is one spot where the black casing around the cable is exposed, and at this spot the cable is pretty rusted. So, is there anything I can do to fix this? (1982 kz550)

Please Log in or Create an account to join the conversation.

  • Stu Pidasole
  • Stu Pidasole's Avatar
  • Offline
  • User
  • User
    Registered
  • if you aint mod'n, you aint rock'n!
  • Posts: 628
  • Thanks: 1

Re: Clutch cable sticking

03 Mar 2011 07:34
#434597
KillDevil7733 wrote:
Okay so the problem seems to be that my clutch cable is sticking. At the beginning of the day, it was tough to squeeze, but it worked. At the end of the day, it was so stiff that I couldn't squeeze the handle at all. On the cable there is one spot where the black casing around the cable is exposed, and at this spot the cable is pretty rusted. So, is there anything I can do to fix this? (1982 kz550)
fix? just buy a new one.

Please Log in or Create an account to join the conversation.

  • martin_csr
  • martin_csr's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7993
  • Thanks: 1648

Re: -

03 Mar 2011 07:44 - 11 Feb 2013 13:21
#434600
-
Last edit: 11 Feb 2013 13:21 by martin_csr.

Please Log in or Create an account to join the conversation.

  • KillDevil7733
  • KillDevil7733's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 9
  • Thanks: 0

Re: Clutch cable sticking

03 Mar 2011 07:55
#434605
Got it. I wasn't sure if it was the rusted part of the cable seizing up, or if it were the clutch box that was seizing on me. I looked up how to do a cable adjustment and it doesn't seem to hard to do. I'll give it a shot and post to see what happens... I will probably end up getting a new cable though, just because of the rust.

Please Log in or Create an account to join the conversation.

  • tinlizzie37
  • tinlizzie37's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 149
  • Thanks: 1

Re: Clutch cable sticking

03 Mar 2011 09:36
#434640
Hi Killdevil, Don't mess around with a rusty cable. It could strand you miles away. Motion-pro sells clutch cables very cheap. I bought mine direct for $15.00 with shipping included. I have a KZ 650 E. You can buy a cable oiler at Harbor Freight for about $5.00. Lubing all the cables once a year is a must for these bikes, plus the regular maintenance called for in the manual. Bob
Bob KZ 650 E1, En 450

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Clutch cable sticking

03 Mar 2011 10:23
#434648
Relatively inexpensive at Z1E, and best service on the planet.

Here's an example, but the bike at hand might be a different model requiring a different length cable.

www.z1enterprises.com/detail.aspx?ID=271

For instance, the LTD model with longer handlebars uses a longer cable than does the standard model with lower handlebars.

Where the LTD handlebars have been replaced with lower handlebars, shorter cables from other models often fit better, without looping way out in front of the bike.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Clutch cable sticking

03 Mar 2011 10:42
#434651
Some new clutch cables do not come with any lubrication. If your new one is like this you can: 1.Buy the lubrication kit(a special clamp to fit on the end of the cable with a can of pressurized oil). Most motorcycle shops sell the cable lube kit.

or 2.Using aluminum foil, make a funnel around one end,pour at least two ounces of 20 weight oil in the funnel and suspend the cable overnight with a catch basin underneath.

Inspect the clutch throw out mechanism(usually behind the engine sprocket cover) for lack of lubrication as this can bind thing up too.Some light grease on the moving parts after their cleaned helps in how smoothly they work.

The clutch rod needs cleaning now and then as the chain will fling chain lube on it. I use some paint thinner on a paper towel to remove the crud build up after removing the clutch rod(be careful removing the rod as a ball bearing is at the other end and may get lost).
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Clutch cable sticking

03 Mar 2011 11:16
#434671
MFolks wrote:
be careful removing the rod as a ball bearing is at the other end and may get lost).

YES! Can't be fun to retrieve once lost in the cases....

Please Log in or Create an account to join the conversation.

  • KillDevil7733
  • KillDevil7733's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 9
  • Thanks: 0

Re: Clutch cable sticking

04 Mar 2011 07:05
#434920
Hey guys, thanks again for the help. This is GREAT information. I would have been lost doing this on my own assumptions.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum