sec. gear insurance

  • nads.com
  • nads.com's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 993
  • Thanks: 20

sec. gear insurance

03 Mar 2011 23:27
#434859
Anyone know what the bushing is and where it goes?
The one goes in the tranny to help sec. gear stay in place?

I lightly back cut second to keep it from popping out constantly. It lasted for two seasons.

The 1000 motor I have has a good clutch, gears, including sec. I back cut them and now wonder if I need to do the recess's?

What's that bushing you insall in the tranny (to keep sec gear engaged), and where does it go?

I really need to stay in sec now, I'm creepin up on a gpz.

I saw some rather interestong data yesterday, the gpz has 120hp and it's at 8700gpz's

They have the dreaded 34's on them YUCK
But they are fast, they have more head flow.

They have 100cc's
I have more compression.

They are a little heavier.

That power range is right about where mine is, just a little higher.

I spent last night porting and blending on the head.
It needed alot of work.

Tomorow I'll get it down to the valve seats cutting.
I got my sand drums and I'm ready to rock.
I need to make this thing flow good I think it will help high rpm power out. I'm hoping to see a shift in the power band.

This head is really alot of work, taking much time.

I think it will be worth it. I wish I knew if the flow restriction presented inside the por is at the seat itself due to it's limited diam.? And the fact that it's smaller than the port diam?


Or is it inside the throat somewhere before the seat?

Well I'm just gonna go in ther like I'm a miniature Bruce Lee and waaa! waa! chop my way to freedom the american way. :woohoo:

Then I'm gonna jump on my bike and haul.

gotta catch that gpz... Bs34's lead the band, the concert hall is the cylinder head, And the mighty and bead blasted cases are the colusium. Inside the colossal colusium, playing is the Reciprocating Assembly.

Playing in lighweight and harmonic fluid like motion, the magic spinning spider like assembly spreads it's power and energy to the foundation. And the foundation rocks.

Bs 34's are bound to be in ingredient in the catch up plan, to catch the gpz and send it packin.

or tear your head off again and start a new strategy

maybe sell it :)

Please Log in or Create an account to join the conversation.

  • mtbspeedfreak
  • mtbspeedfreak's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1413
  • Thanks: 36

Re: sec. gear insurance

03 Mar 2011 23:42
#434860
nads.com wrote:
Anyone know what the bushing is and where it goes?
The one goes in the tranny to help sec. gear stay in place?

I lightly back cut second to keep it from popping out constantly. It lasted for two seasons.

The 1000 motor I have has a good clutch, gears, including sec. I back cut them and now wonder if I need to do the recess's?

What's that bushing you insall in the tranny (to keep sec gear engaged), and where does it go?

I really need to stay in sec now, I'm creepin up on a gpz.

I saw some rather interestong data yesterday, the gpz has 120hp and it's at 8700gpz's

They have the dreaded 34's on them YUCK
But they are fast, they have more head flow.

They have 100cc's
I have more compression.

They are a little heavier.

That power range is right about where mine is, just a little higher.

I spent last night porting and blending on the head.
It needed alot of work.

Tomorow I'll get it down to the valve seats cutting.
I got my sand drums and I'm ready to rock.
I need to make this thing flow good I think it will help high rpm power out. I'm hoping to see a shift in the power band.

This head is really alot of work, taking much time.

I think it will be worth it. I wish I knew if the flow restriction presented inside the por is at the seat itself due to it's limited diam.? And the fact that it's smaller than the port diam?


Or is it inside the throat somewhere before the seat?

Well I'm just gonna go in ther like I'm a miniature Bruce Lee and waaa! waa! chop my way to freedom the american way. :woohoo:

Then I'm gonna jump on my bike and haul.

gotta catch that gpz... Bs34's lead the band, the concert hall is the cylinder head, And the mighty and bead blasted cases are the colusium. Inside the colossal colusium, playing is the Reciprocating Assembly.

Playing in lighweight and harmonic fluid like motion, the magic spinning spider like assembly spreads it's power and energy to the foundation. And the foundation rocks.

Bs 34's are bound to be in ingredient in the catch up plan, to catch the gpz and send it packin.

or tear your head off again and start a new strategy

maybe sell it :)

...And this is why marijuana is a controlled substance. :laugh:
2000 ZRX 1100
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!

If it has tits or tires, it'll give you problems!

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: sec. gear insurance

04 Mar 2011 00:21
#434877
mtbspeedfreak wrote:
...And this is why marijuana is a controlled substance. :laugh:

This is not just weed :laugh:
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • andy9802gt
  • andy9802gt's Avatar
  • Offline
  • User
  • User
    Registered
  • If it tastes that good, eat it yourself.
  • Posts: 695
  • Thanks: 19

Re: sec. gear insurance

04 Mar 2011 01:52
#434878
TeK9iNe wrote:
mtbspeedfreak wrote:
...And this is why marijuana is a controlled substance. :laugh:

This is not just weed :laugh:

Most of the time he sounds like he's been up for three days tweaking and cooking meth....
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: sec. gear insurance

04 Mar 2011 03:53 - 04 Mar 2011 04:05
#434886
nads.com wrote:
Anyone know what the bushing is and where it goes?
The one goes in the tranny to help sec. gear stay in place?...What's that bushing you insall in the tranny (to keep sec gear engaged), and where does it go?
I really need to stay in sec...
Click > Where's the Fat Lady?

And > Shift Aid Bushing

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 04 Mar 2011 04:05 by Patton.

Please Log in or Create an account to join the conversation.

  • PLUMMEN
  • PLUMMEN's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7983
  • Thanks: 104

Re: sec. gear insurance

04 Mar 2011 04:54
#434896
breath man breath! :laugh:
Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: sec. gear insurance

05 Mar 2011 05:03 - 05 Mar 2011 05:07
#435115
:laugh:

Last edit: 05 Mar 2011 05:07 by larrycavan.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum